Questions & Answers – Radiation-Free-Living.com

An Email from a Client

Sebastian Krueger — Fri, 12 Feb 2021 09:15:05 +0000

I recently received an email from a client with a photographed excerpt from a book on the subject of EMF exposure. Among those are electrosmog (household electricity) and radio (microwave) exposure.

The author’s quote refers to the fact that, in general, we should be very cautious with harmonization products that supposedly promise to be able to somehow compensate for electromagnetic stress.

He writes that the body always reacts with corresponding symptoms and that, in his opinion, for a person with no knowledge of the subject, it is very dangerous to blindly trust the reliability of a balancing product.

The customer’s concern and his email are very justified, because this is precisely what distinguishes us here at BIOGETA from many other manufacturers.

This was my response:

Dear Mr. XXX,

Thank you for your email and for the excerpt from Dr. Mercola’s book.

As a construction biologist, I have to agree 100% with Mr. Mercola. I always get the goose bumps when I hear or read advertisement texts of some harmonizing product manufacturers, things like:

~~“From now on your electricity is healthy”~~, or ~~“Your cell phone is now a therapeutic device”.~~

The idea is to ALWAYS use a harmonization product to balance a residual charge that cannot be disconnected or shielded.

That is why you have received, together with your Biofeldformer, also a book and a video course, in which I explain exactly how to reduce the tensions within your own four walls to the minimum necessary, to effectively balance the rest by making use of the Biofeldformer.

An FM Biofeldformer is basically a bioresonance device. In other words, restoration of the organism takes place after stress. It may look like a direct compensation, but it is basically a recovery that takes place immediately. Like a direct therapy.

However, it is impossible to eliminate the thermal effects if you hold your cell phone directly to your ear. They are and will remain microwaves! You can only get rid of them by turning them off or shielding them completely.

But then you won’t get reception…

I myself can feel whether the WIFI is on or off at night, despite the Biofeldformer. But when I do a bionergetic measurement, however, I no longer detect any tension in my body as long as the Biofeldformer is active.

Every time I deactivate the Biofieldformer, I can feel the stress much stronger. I also measure massive disturbances through high frequency directly in my body.

This can be extremely perceived in a car. For instance, when I make many phone calls in the car, I can feel a clear difference, especially in my subjective perception, when the Biofeldformer is active or and when it is not.

The best way to protect yourself when you are in the car is simply not to talk on the phone and – very important (!) – to deactivate the Bluetooth on your cell phone, otherwise it will keep transmitting constantly and will want to connect to the cell phones of other vehicles at every traffic light.

You may be wondering why I’m showing you the client’s email and my response to it here.

And the answer is:

I write it because for me it is very important not to just recommend a device that you easily plug in, but then without any effect whatsoever, you are still blindly exposed to radiation.

During my active time as a construction biologist, with almost daily examinations in residential buildings, I always worked according to my formula of the Six Building Blocks.

Here I summarize them briefly, as I have previously described them in detail elsewhere:

Educate

Avoid

Turn Off

Shield

Balance

Build up

The balancing is only done at the end. It is done by a balancing module of any kind and it is done only for the residual load that is impossible for us to get rid of.

But beforehand you should try to reduce the exposure to the absolute minimum by disconnecting, shielding and avoiding, and then, ideally, only compensate for the residual exposure.

A large part of the radiation usually comes from within your own four walls.

Therefore education is always at the forefront. It will know what to do this and what to look out for.

And this is exactly what the Radiation Free Living blog, videos, emails, the Elektrosmog Guidance and Support book and the corresponding video course are for.

Only in the case of earth rays we have to rely completely on a functioning compensation option, because earth rays can neither be shielded nor safely avoided in the long run.

They can change or arise again….

And this is where our FM Biofieldformer devices definitely come into play. I can personally state that I know of no other system that balances geopathic interference zones as reliably and measurably as the BIOGETA® FM Biofieldformer .

And it is also worth adding that in all the years of practical use I have come across many products….

Construction biologist Andreas Grohmann wrote about this in a public post on a large construction biology forum:

“I would like to refer once again to BIOGETA’s Bio-Wafer and FM Biofeldformer. The moment I start using these modules, I can no longer detect any of the geopathic disturbances that I had previously measured with my PS10!”

Note: PS10 is a bioresonance device for the reproducible definition of terrestrial radiation in building biology)!

If you haven’t yet read the article on the Six Building Blocks, you might wonder what the sixth block “Build Up” means.

The goal is to rebuild the energy system and keep it stable.

For example, by drinking good, clean water, eating nutritious food or with the help of an energy booster, such as BIOGETA® Bio-Wafer “Active”.

But please do not fall into the “comfort trap” by saying:

“Well, I am just going to balance it all at once, put a Bio-Wafer in my pocket and therefore I will be able to sleep deeply, while laying next to my WIFI router”

All you have to do is sleep next to your neighbor’s router

Excerpt from Interview: Radiesthesia in Construction Biology

Sebastian Krueger — Thu, 12 Nov 2020 10:41:34 +0000

I was recently interviewed for a book on healthy living spaces around the topic of building biology and radiesthesia.

I was asked the following questions:

How do you combine the scientifically based construction biology with the often esoterically known radiesthesia? How do these two disciplines complement each other?

Next, I would like to share my answer with you, because I think the biggest problem is that we often tend to confuse the terms “esoteric” and “exoteric”.

In the context of a bioenergetic assessment I work radiesthetically, but not esoterically. I work exoterically, which means that I resonate with the external fields that are around me and I feel in my body.

The tools I use to evaluate are basically tools to elude my mind analytically and critically, because the mind always wants to explain, relativize or define.

That is why I “unfold” it the information I take in through my body, as values in scale systems by means of a small tensor. This is how the mind performs its much preferred left-dominant analytical work, thus helping me to structure things that I feel but cannot classify.

More than 3500 years ago, in Hawaiian Huna-Shamanism, pendulums were used to obtain information from the higher self ( meaning the level of information that surrounds us), bypassing the middle self, namely the critical mind.

This is the essence of radiesthesia.

And at the present time is unknown by many that all the great minds of our time have worked radiesthesically.

"Insofar as he makes use of his healthy senses, man himself is the best and most exact scientific instrument possible"

Johann Wolfgang Von Goethe

Max Planck defined the term “ethereal”, namely for the range beyond which measuring instruments fail and the range of “subtlety” begins. Einstein called this realm “metaphysical”.

These terms are associated today with esotericism, but originally they came from physicists. In their time, they all used to move around because they knew that only in this way would they have access to information that would otherwise remain hidden to them.

André Bovis also comes from that time, from before World War II. He was a physicist and official food inspector for the French government. To check the vitality of food, he used the bio-meter he had developed, in which he calculated the values. This is hard to imagine today, but in that regard, incredible as it may seem, people were much more advanced at that time than they are today.

I myself work, among other things, with a slightly modified form of his bio-meter (You will find more information about Bovis values in >> What are Bovis Values).

Like any animal, humans also perceive which fields are good for us and which are not. However, we are so mentally conditioned that we always try to compare things with something we have already experienced or felt, simply because we have been told about it over and over again. So we make those experiences or things told to us our objective and defining truth.

However, at all times we have access to the big picture, from which we only perceive things selectively and “interpolate” the rest. It is comparable to an iceberg.

Our everyday consciousness is the tip of the iceberg, but the rest is also there, and we can access it, for example, using radiesthetic assistance.

In my building biology analyses, radiesthesia plays an important role along with bioresonance, which is basically also a form of passive radiesthesia.

The procedure I have developed over the years allows me to evaluate fields without having to know what they are. I can simply define how the fields behave according to certain factors. If they attract or give energy, and if the body can absorb this energy or if stress is produced in return.

With resonance testing, where I basically just compare frequency spectra, I can see in detail what the disturbance is.

This combination is for me the most effective and accurate way to define and evaluate geopathic disturbances, because it makes it easier for me to check, for example, whether the harmonization performed has worked or not. This goes far beyond investigating with a dowsing rod, as I used to do in the past.

But, unfortunately, too many people still have problems with this issue.

I know that there are many building biologists out there who have learned practically nothing about geopathy in their training institute and later on when they are already in their professions, at best, the most they do is work with a dowsing rod, if at all.

At the PSA (Paul Schmidt Academy) and now at the IBUH (Institute for Building Biology and Health) in the basic training phase, you learn the basics of building biology from my good friend Wolfgang Sievers, as well as all the technical and physics principles of construction and how to use a bioresonance device for the reproducible definition of geopathic interference zones. This makes this training unique in the field of construction biology.

For the bioenergetic evaluation method, I am currently developing a learning module, which complements this information and offers a good introduction to the subject for beginners in the field. From this starting point you can inquire further if you are interested.

You will receive more information shortly.

What does biofield forming mean?

Sebastian Krueger — Thu, 08 Mar 2018 23:26:25 +0000

Once the basis of bioresonance therapy is understood, the logical next step is to think about its direct use to compensate for stresses that occur. So quasi a direct repair in case of occurring disturbance. The whole thing is called biofield shaping and can be explained well with the help of a small parable:

Imagine you have built a wall and someone is constantly hitting the top of the wall with a hammer. Then, at some point, the wall becomes brittle and begins to collapse. It’s then only a matter of time before the wall is so weakened that only massive repair efforts can prevent it from completely collapsing – if at all. However, if you have a few helpers on the job who will stabilize the wall again after each blow, put in a little mortar and take care of it, this wall will last a long time, and withstand the heaviest storms. Despite the continuous shocks.

This is exactly what a functioning biofield formation does!

It continuously balances the body by offering bipolar-balancing frequencies that the body is allowed to integrate as needed, thereby permanently stabilizing it.

Pure biofield forming

Pure biofield shaping is a harmonization of the organism. In other words, as a rule, nothing is changed in the interference zone, but the body is provided with the appropriate balancing frequencies.

The basis for understanding this type of room harmonization is provided by bioresonance. Paul Schmidt has already recognized and scientifically described at the beginning of the 70s that everything around us, as well as especially in ourselves vibrates in very specific frequencies, respectively certain frequency values trigger certain regulations in the body.

Every frequency has both polarities, i.e. plus and minus. If there is an imbalance in one of the frequency values, i.e. a polarity shift, disharmony arises and later usually illness.

For example, if a person stays on an irritation zone – e.g. caused by a water vein – the polarity shifts on one or more certain frequencies and the body is weakened. If one knows the corresponding frequency values, one can make them available to the body in the room with the help of special resonators or as pure information.

The best known Biofieldformers are supplied by the company Rayonex, whose founder was Paul Schmidt himself. The approach of the Duplex series is to provide the full frequency spectrum of geopathic interference zones in both polarities in the room. Due to the law of resonance, the body uses only what it needs. In other words, if there is a deficit of a plus polarity in a certain frequency, it gets it directly, or can help itself to it.

The disadvantage of the Duplex is that it only works in a relatively small radius and that you really have to take care of it (it has to be regularly showered off and kept dust-free, otherwise the polarities shift and it then no longer balances properly) and that a building biologist has to set it up. You can order such a device for free, but I am of the opinion that you have to turn it into its CRP (Critical Rotation Point) to make it work properly. In addition, it must be free of interference, i.e. it must not be placed on any water veins, faults or grid lines.

Another disadvantage is that it does not provide protection against electrosmog in the basic configuration, but must be retrofitted with special resonators for this purpose. However, if you pay attention to everything, it works well.

FM Biofield Formation

With FM biofield shaping, BIOGETA® FM Biofieldformers manage to balance the body in polarities, both in the case of earth radiation and electrosmog pollution, as well as to measurably eliminate the spectrum of geopathic interference zones.

FM in this case stands for frequency modulation, because the compensating frequencies are modulated onto the 50Hz of the house current (similar to a radio station), and are thus available throughout the house or apartment.

In addition to the biophysical frequency approach, many other harmonizing affirmations are integrated into the BIOGETA® system and provide a harmonically balancing oscillation field. Also an interfering frequency to that of earth radiation, which is also the basis of the bio-wafers that have been successfully used in practice for several years (for more information see: BIOGETA® Bio-Wafer).

This makes the BIOGETA® system the only system known to me that is able to measurably neutralize all geopathic interference zones in the house via the electric circuit and to compensate for the damaging effect of electrosmog, or at least to greatly weaken it.

Other systems, some of which work in a similar way, balance the body on a disturbance zone or virtually reprogram it so that it does not react to the disturbance. However, this cannot be measured, but must be believed. With the BIOGETA® system, even with a modern bioresonance device (PS10 or PS1000 from Rayonex), not a single frequency value of a geopathic disturbance can be detected once the module has been installed – provided that the right size of device has been chosen.

Those who know a little commuting will also notice that the current suddenly turns right and the air ionization changes – and small children are more relaxed and sleep better.

Some customers speak of a pleasant tingling sensation that goes up the spine as soon as the system starts working. Others of suddenly fresher air in the rooms.

The BIOGETA® system works on four levels, so to speak:

– at the frequency level – by interference cancellation of the high carrier frequency of earth radiation

– at the regulatory level – by balancing the polarities in the important regulatory frequencies of electrosmog and geopathic disturbances

– on the informational level – through loving and healing affirmations and nurturing intentions

– on bioenergetic level – by balancing negative Bovis values and magnetic pulsation force

An interesting side effect of the system can be observed in the behavior of the animals. Dogs usually react very relaxed to the suddenly changed oscillating field, since they – like us humans – are radiation fugitives. Ants, on the other hand, usually disappear after a short time because they prefer left-turning fields.

Tester a BIOGETA® FM Biofieldformer!

Order a module for 3 months for testing without obligation. If you are not satisfied with the effect of the device, simply send it back and you will receive a full refund. Without deductions!

Why geopathic interference zones are often vertically displaced

Sebastian Krueger — Sat, 09 Sep 2017 11:34:51 +0000

At this point I would like to address the question, which arises again and again in practice, why water veins in different floors are not necessarily to be measured at the same place, and how it comes to that.

Vertically shifted … What does that mean exactly?

In some of my trainings I have learned that you basically only need to examine one floor of a house for earth rays and then transfer these results 1 to 1 to the floors above. But is that really the case? Unfortunately no. Because in my daily practice it has been shown again and again that disturbance zones, which were to be found e.g. in the first floor at a certain place, were or are to be measured in the floor above sometimes somewhat shifted – sometimes even quite strongly shifted, or more undifferentiated. But how can this be? Water veins should always remain in the same place, shouldn’t they?

When this happened to me the first few times, it was always very energy-consuming. Because, on the one hand, I naturally wanted to point out every interference zone as precisely as possible, but on the other hand, I had this external belief set in my head that an interference zone that had already been found on the lower floor had to be in the same place upstairs.

In addition, I was convinced that my customers also saw it that way. I therefore always regularly broke out in a sweat when the interference zones found in the individual storey levels did not coincide.

In addition, I must mention that during the first time I was only on the road with a dowsing rod, and it has therefore been all the more difficult to then explain the results found. Today I measure with the help of a bioresonance device, so that I can define the different frequency spectra of the individual interference zones very precisely.

Likewise, I can explain to my clients today, using examples from nature, how it can happen that I can measure the spectrum – or frequency – of one and the same water vein on different floors at different positions.

A question of frequency level

In order to understand how the spectrum of a water vein behaves, we must again make a small physical detour into the realm of frequencies.

As already described in more detail in other articles, the frequency spectrum of a water vein that we can feel consists of at least two components. On the one hand, there is an individual frequency spectrum, which, for example, distinguishes a water vein from a fault or another phenomenon.

These frequency spectra can be precisely distinguished, for example, with a bioresonance device (a spectrum is several individual frequencies which, taken together, produce a spectrum. Like e.g. the spectrum of visible light).

And secondly, there must be what I call a “carrier wave” that has the following properties:

It vibrates extremely high – the frequency is about 10h45 Hertz.
It is very short-waved – and thus passes virtually through everything unhindered.
It behaves similarly to a laser beam – and therefore does not scatter

So any kind of earth radiation is a kind of frequency modulation, as we know it e.g. from a radio station.

The great fear in the search for a well

If one has to look for an optimal drilling point for a well with the dowsing rod, a basic problem arises again and again. Namely, it can happen that you get the rash for a water vein at a certain point – but the real course of the vein is a little further to the left or right.

This can happen when you mentally tune into the frequency of the water or the water vein, rather than the geological “bank” of the vein.

If, for example, a cavern has formed above the vein, or a quartz vein is running, it is possible that the total spectrum of the water vein – including the carrier wave – is diverted by geological, technical or other circumstances, and no longer radiates straight upwards.

So it can happen – and it does quite often – that the irritation zone of a water vein is not directly above the actual vein.

Do fields always have to build up in a cone shape?

According to physical science, fields always build up in a cone shape. This would mean in this case that above the cavern or discharging disturbance, the spectrum of the water vein should radiate broadly to all sides.

But it does not!

However, if you compare the total spectrum of a water vein with a laser beam, which, unlike a light bulb, also does not scatter but runs in a very straight line, this explains itself – and thus also the topic of this article.

For example, if we take a small pocket laser and place it vertically on the floor, it will beam upward at a 90° angle. However, if we place it on a slightly slanted surface, its beam will also be slightly slanted. According to the angle of the base.

And in my opinion it is exactly the same with a water vein. Because if the highly radiating spectrum of a vein is slightly diverted by some circumstance, it is very likely that this then no longer radiates straight up, but slightly offset – or oblique. The result is then an interference zone, which shifts vertically continuously.

In nature, this can be observed very well in trees that first grow straight – and then from a certain height – start to avoid the disturbance zone. This can be clearly seen in the upper picture on the page.

In the second picture you can see the whole thing from another perspective. You can see the first tree there, how it starts to avoid the disturbance zone from about 2m height. In the background (in the red circle) you can see another tree, which is twisted from the same height. It, too, reacts to the diagonally running spectrum of the water vein at this point.

Another sign that the trees are affected by a water vein is the strong moss in the area of the disturbance.

By the way, a similar phenomenon can be found with global grids. Although these are not earth rays – i.e. coming from the earth – but magnetic grid systems, the lines as well as the crossing points, respectively the corresponding frequency spectra are also often derived.

Thus, it is not uncommon that an intersection point of the Curry grid has to be measured somewhat offset in different floors of a house. It is therefore not possible to examine one floor of a house and transfer the results to the remaining floors, but must measure individually on each floor.

What exactly is bioresonance?

Sebastian Krueger — Fri, 18 Aug 2017 09:21:26 +0000

To understand bioresonance, this can be well explained by a simple example:

When we go out in the sun, certain regulatory processes start in our body. This is, for example, an increased pigmentation of the skin, which we experience as a tan, or the production of vitamin D.

In the specific case of the sun, the ultraviolet component in sunlight ensures the activation of these processes. The frequency responsible for this process is in the terrahertz range and is ideally available to the body in a balanced polarity ratio.

If a person has a deficit of vitamin D, this can be detected with the help of a bioresonance device in the form of a polarity shift in the corresponding frequency. Usually even far before there are visible symptoms on the physical level.

It is exactly the same with every other process in the human body. Specific frequencies start very specific regulatory processes in the body.

Every process, every organ, every disease, but also every disorder vibrates in a very specific measurable – and largely known frequency. And it is always about a balanced relationship of polarities.

To put it simply:

Bioresonance therapy is the search and administration of a certain frequency with the aim to cause a self-regulation in the body.
(Prof. Dietmar Heimes / Rayonex)

An example:

If someone has a problem with the skin, a bioresonance analysis examines all the “system components” of the body for an energetic imbalance in the form of a polarity shift in certain frequencies.

It may turn out, for example, that the kidney does not “vibrate” correctly and therefore does not work properly. Expressed in polarities, it probably has too little “plus” polarity and thus too much “minus”.

In therapy, one would now provide the body with the spectrum of the kidney in both polarities, so that it can integrate the missing part, the regulation process of the kidney starts, and it works properly again.

It’s always about balance!

The problems of the skin (which is also an excretory organ) would then disappear automatically. So you see, this is a more causal approach, which is not about eliminating only external symptoms.

Likewise, bioresonance is a very gentle therapy method, because nothing is forced on the body, but only something is made available. Due to the resonance principle, it takes only what it needs.

The causal approach of bioresonance is what also makes this method so valuable for building biology!

If, for example, someone comes to the practice of a bioresonance therapist with the above-mentioned skin problem, first of all causal parameters are checked, which can hinder the success of a therapy – no matter what kind – and weaken the body again and again.

These are, for example, disturbances of the intestinal flora, an unbalanced acid/base ratio, pollution by pollutants, heavy metals or molds. Infections by bacteria, parasites or viruses. Or stress caused by electrosmog or geopathic interference zones, such as water veins, faults and global grids.

Personally, I am a convinced user and big fan of bioresonance according to Paul Schmidt. With this system it is possible to show the finest stresses in the body down to the cellular level. Even the PH value of the blood can often be determined more precisely than by the standard urine test with litmus paper.

For example, with the help of a Rayocomp PS10 or PS1000 from the company Rayonex, I can determine whether someone has a load from WLAN, LTE, DECT (cordless phones) or Bluetooth. Or a load by a water vein or a crossing grid point.

This is possible so precisely because the individual frequency spectra of the different “interferers” differ in their structure. Each of these spectra is comparable to a fingerprint. They are unique, and therefore differentiable. A disturbance then shows itself – in the context of the testing – as a polarity shift in the corresponding frequency spectra.

If I find a disturbance caused by a geopathic zone in a patient during anamnesis testing in the practice, or in a customer at home at the beginning of a building biology house examination, I find this disturbance later under his sleeping or working place with almost 100% hit rate. Usually, after examining the sleeping place of couples, I can tell exactly who sleeps on which side. It mostly coincides with the previously measured stresses in the energy field of the persons.

The really great thing about the Rayocomp devices is that not only are they great for human and animal analysis and therapy, but with a little hack they also provide an empirically proven method for actually measuring earth radiation.

It is the only reproducible measuring method without the active-mental use of dowsing rod or pendulum. Basically, the specific frequency spectra of the interference zones are compared with each other. And the beauty of it is that the same result, can be reproduced at any time by another user with the same equipment.

“BIOGETA® Harmonizer: Effect confirmed by bioresonance!

There was another dowser there before and installed something. Does that interfere with the investigation?

Sebastian Krueger — Fri, 10 Mar 2017 12:58:48 +0000

I get this question very often, so I decided to write a separate article about it.

Basically, it doesn’t matter if someone has been on site before and installed or buried any shielding mats, magnetic discs, radionic harmonizers, or other items to shield or redirect earth rays or water veins.

I always measure the “actual” condition on site. And not with a dowsing rod, but first of all technically, with a modern bioresonance device. This device contains, among other things, all frequencies of geological disturbances – such as water veins, faults or global grids. By means of a resonance test, it is then possible to determine very precisely what kind of disturbance it is. One measures with it the frequency spectrum, which prevails at appropriate place – mostly the sleep place.

If a harmonization of another dowser or one of the innumerable suppliers of interference suppression devices, was made before, there are basically only three possible states.

1. body balanced – no interfering frequencies present

If the previously installed interference suppression is a shielding mat or magnetic compensation mat, I should no longer be able to detect a geopathic frequency spectrum with my measuring device. By shielding, the sleeping place should then be free of these frequency values. If I can still measure corresponding frequencies, the shielding does not work. I personally have not found such a mat in my daily work. A real cancellation of the frequency can only be achieved by interference. However, one can decouple a field by a certain construction method. However, this is primarily a matter of the type of construction rather than the material used.

2. body balanced – interference frequencies present

If it is a pure biofield shaping, the body is balanced by the previously installed device on the interference zone. The disturbance including the disturbance frequencies are then still measurable and present, but the body has no disturbance in the corresponding regulatory frequencies. This can also be wonderfully determined with a bioresonance device in the body of the person living there. Basically, this is one of the basic checks of any therapist or alternative practitioner before a therapy can begin. He checks if there is a stress caused by a geopathic disturbance, which can endanger an intended therapy success.

During a house examination I also start with this step, and examine the people living in the house for stresses caused by geopathic disturbances, electrosmog and often even pollutant and mold infestation. As a non-medical practitioner and certified bioresonance therapist, I am allowed to carry out such examinations on site, and it then usually becomes directly apparent in which direction I need to search. If a load is indicated by a water vein, the probability is very large that I find this then also at appropriate sleep place. If in such a case a harmonization of another provider is already active, it will expose itself directly as ineffective. Unfortunately, I experience this very often.

There are also said to be devices that do not regulate or balance the body through active biofield shaping, but whose goal is to render a still measurable interference zone harmless to the human body. These are often radionically informed objects positioned in the room or connected to the electric circuit as an information system.

Here, too, one can very well determine whether the whole thing is working properly by examining the body after about 3 months. My experience has shown that a body that has been massively disturbed by a geopathic irritation zone for years, will have reduced this disturbance after a maximum of three months, as soon as the stress is removed. If someone comes to my practice today and I measure a strong polarity shift in his organism in the frequency range of a water vein, and I relocate him to a place free of disturbance or put a bio-wafer under his bed, I will no longer be able to detect this stress in him in about three months. The body will then have regulated it away itself.

So, if the purpose of an interference suppression device is to render a stress harmless to the body without actively regulating it, I should still not be able to detect any more stress in the person after 3 months at the latest. If I do, the interference suppression will not work. By the way, these tests can be done not only by me, but by any good alternative practitioner or therapist. Either with bioresonance, kinesiological, radionic, or radiesthetic.

3. body not balanced – interference frequencies present

Unfortunately, this is the case that I encounter most often. In more than 99% of all cases, where an interference suppression has been installed before, I find strong loads due to geological disturbances and always also due to electrosmog in the body of the persons living there. Additionally – or underlying this – I can measure the corresponding frequency spectra of the interference zones then also at the sleeping places. Of course, this can also be due to the fact that I am primarily called to people who have problems and for whom the previously installed objects obviously do not work.

If you are not sure whether an interference suppression measure actually works, I advise you in any case to have yourself checked by an alternative practitioner with bioresonance. Independent of the subjective perception – e.g. concerning your sleep – you will find out whether your organism is exposed to a weakening interference zone.

Notice:

At this point, I can’t help but mention that both a BIOGETA® Bio-Wafer and a BIOGETA® FM Biofieldformer create a truly interference-free space. With both differently constructed devices, after installation no more interference zone can be measured locally with a bioresonance device.

Likewise, at a later bio-check with bioresonance, no more disturbance in the body is detectable. This has always been the case without exception – mostly the check was done by a therapist unknown to me.

At this point, however, it is important to distinguish how the individual devices work.

Whereas the BIOGETA® FM Biofeldformer actively balances the body and treats it directly, the Bio-Wafer merely deletes or blocks the interference zone. This has the consequence that after the application of a BIOGETA® FM bio-field shaper often already after a few days no geopathic disturbance is determined (also no load by electrical smog), whereas with the application of a BIOGETA® bio-wafer the body needs up to 3 months, in order to regulate the – often for a long time – existing disturbances away.

” More information about the different de-pulping possibilities
” Detailed information about the BIOGETA® Bio\-Wafer

What is a good place to sleep?

Sebastian Krueger — Tue, 19 Apr 2016 12:21:20 +0000

To answer this question, we must first of all look at who is asking this question, or rather for whom it is being asked. Because for a human being, in principle, somewhat different rules apply than for a cat, for example.

Whereas the human being is a so-called radiation fugitive and is disturbed in many ways by left-turning earth radiation, a cat, as a radiation seeker, usually looks for exactly those places to sleep and regenerate which the human being should better avoid and to which he reacts with energy loss and various physical and psychological symptoms. In my home examinations I experience it again and again that the disturbance zones marked by me are primarily the favorite places of the four-legged velvet paws.

Radiation-free place = Good place

The sleeping place for us as humans should be one thing above all, namely radiation-free. Unfortunately, this is quite difficult in today’s world, because in addition to the typical geopathic irritation zones such as water veins, rock fractures, earth faults as well as the grid systems such as the global grid (Hartmann grid) or the diagonal grid (Curry grid), we live in an increasingly mechanized world with WLAN, mobile telephony, electromagnetic fields from house and railroad electricity and many other influences that disturb the organism. Radioactivity and various types of toxic radiation – caused by plastics, plasticizers, solvents, dyes, preservatives, etc. – affect both our physical well-being in a direct way, and especially our information field on the subtle level.

The same applies to certain symbols that surround us every day, such as skulls or pentagrams. Even the ubiquitous cross has a certain energetic quality and information content that is not necessarily for our good.

The harmonization of a sleeping place

From my experience, harmonizing or de-harmonizing a sleeping place includes several important steps and factors, which I will briefly describe below. More detailed information on the individual points can be found at appropriate places here on the blog.

Neutralization of water veins – Removal of earth rays

With water veins it is important to distinguish whether it is a left-turning water vein or a right-turning water vein. A left-turning water vein withdraws energy from the body, causes a depolarization of the cells and an increased positive ionization of the room air – we as humans, however, need a primarily negative ionization. A left-turning vein vibrates in an energy range of less than 6,500 Bovis. A dextrorotatory vein of water donates energy, provides a healthy negative ionization – but leads to an overstimulation of the nervous system and an energy surplus when staying longer and depending on the strength of the vein.

A left-turning water vein radiates in a frequency of 10h45 Hertz in a positive polarity. In order to effectively neutralize this radiation, radiation in the same frequency but in the opposite polarity is required.

To free a sleeping place from the harmful radiation of a left-turning water vein, I first measure the existing strength of the radiation by determining the Bovis-values as well as the GfM-value (health-promoting for humans) and then choose a suitable harmonizer in the corresponding strength.

The result should be, after the bed has been dejammed, per sleeping place, that the Bovis value is between 8,000 and 12,000 and the GfM value is at least +3.

In the case of a clockwise water vein, it depends on how strong it is, and whether it runs singly, or it crosses other interference zones.

If a dextrorotatory vein vibrates at 8,000 to 10,500 Bovis, it poses no danger to us and can pass quietly under the bed – provided the magnetic pulsation force is balanced (>70%). It can even help to weaken or cancel the damaging effect of a left-turning vein when they cross.

It is important to always measure the respective values, keeping in mind the desired result of 8,000 to 12,000 Bovis.

If a dextrorotatory water vein vibrates higher, then it usually has healing water quality and if you drill into it, reduced water with a high healing effect bubbles out of it. The spring in Nordenau, for example, vibrates with 21,000 Bovis.

However, one could not sleep directly on such a vein. The energy would be too strong. Unfortunately, these right-turning water veins are very rarely found.

With earth rays in the form of rock fractures or faults it behaves basically exactly like with water veins. Here, too, it is a matter of raising the energetic values into a range in which energy is no longer withdrawn from us, but rather some energy is added.

The earth grids

The most common earth grid systems, the Hartmann grid or global grid, and the Curry grid or diagonal grid and the Benker cube grid, are not really earth radiation, but belong to the field of cosmic radiation.

Whereas the Hartmann grid can have very high Bovis values of 14,500 Bovis on its positive crossing points, the crossing points of the Curry grid are always very discharging and harmful to health.

The worst points in all my investigations were and are always curry crossings in connection with water veins, water vein crossings, rock fractures or faults – or crossing pucts of the Benker cube grid. Here qualities of under 2,000 Bovis prevail not infrequently.

My clients who slept in these places had symptoms such as cardiac arrhythmias, complete lack of energy, cancer, disturbed hormone levels, depression and a variety of different disorders. Almost all of them were so-called “doctor hoppers.” One has been to over 15 different doctors and alternative practitioners over the last year without feeling any improvement.

The worst points in all my investigations were and are always curry crossings in connection with water veins, water vein crossings, rock fractures or faults – or crossing points of the Benker cube grid.

When harmonizing the earth grids, as in the case of the suppression of earth rays, make sure that the energy values fit. Negative values can be raised and balanced quite well. If the values are too high, e.g. at the intersection of two positive global grid lines, only bed rearrangement will help, since the excess energy cannot be extracted – or only with great effort. Whereby these are mostly no problem, since they are to be measured mostly only on about 20 x 20 cm …

Electrosmog

One of the greatest dangers to our general health is electrosmog, which is spreading ever faster. In addition to low-frequency household electricity, it is primarily high-frequency microwave radiation that we encounter virtually everywhere.

Triggered by mobile phone transmitters, WLAN routers, DECT cordless phones, cell phones or smart meters – the new “intelligent” electricity meters to which all households will be switched in the future by decree of an unelected EU government – it has now become almost impossible to avoid this radiation.

Many so-called civilization diseases such as neuralgia, fibromyalgia, heart rhythm disorders, migraine, cancer and rheumatism can be linked to electrosmog. The growth of ADHD diagnoses in children and adolescents since 1995 corresponds roughly to the same exponential curve as that of newly registered mobile phone connections. A coincidence?

The human pineal gland is responsible, among other things, for our melatonin production. There are entire books about this so-called “chief hormone,” so important is it. Among other things, cell regeneration and our reproduction are controlled by melatonin. In order to produce melatonin, the pineal gland needs darkness. So it happens at night.

However, electrosmog is interpreted by the body as daylight, thus electrosmog prevents and disturbs the production of melatonin.

Before serious physical damage occurs, this can already be measured by a reduction in pineal gland activity. This is only one of the countless factors caused by electrosmog. Others are e.g. a clumping of the blood after a cell phone call, an increased positive ionization of the room air or a change in the orgone energy, i.e. the life energy that surrounds and animates everything.

In order to effectively eliminate electrosmog, either extensive and very costly reconstruction work is required – with the help of special shielding foils, paints, wallpapers and grids, or harmonization on the information level.

The latter makes more sense from my experience, because it is easier to realize. The basic idea behind it is to build up a self-contained oscillation field, which takes place in a frequency range to which we are in natural resonance. All frequencies, which are outside of this field, receive by the resonance law quasi no entrance to this field. Thus, any radiation harmful to us is harmonized and loses its harmful effect.

Energetic attachments / geomantic problems

Another factor for a possible disturbance of the sleeping place can be purely energetic or geomantic. I recently had a case where a family could not find restful sleep for almost 8 years and became more and more emaciated.

When I checked the house, I found a high load of water veins and positioned my harmonizers in appropriate places. The earth radiation was thus eliminated and the energy deficit of the inhabitants improved daily. I regularly checked the energy increase by various measurements.

Normally, as people’s energy increases, their well-being improves, but in this case, they seemed to feel worse and worse as their energy increased. It was very puzzling.

According to their own statements, they slept much better now, but had the feeling that all their energy was robbed during the day. And so it was in the end. Something terrible must have happened in the past on the spot where the house stood, so there were energy fields there that drained the residents of their energy. The more energy they had, the more could be sucked – hence the feeling of aggravation.

Through a so-called geomantic “clearing” these energy fields were virtually erased and since then everyone feels very comfortable in the house.

A good mattress – rest – fresh air

And last but not least, of course, make sure that you sleep on a good mattress, the bedroom is sufficiently ventilated, the temperature in the bedroom is not too high and you are not exposed to noise pollution.

Radio alarm clocks, water beds and electric slatted frames should be avoided as far as possible, as should bedspreads with skulls or stars (pentagrams). A harmonious design of the bedroom in the form of soft colors and clear order also promotes healthy sleep. Mirrors do not belong in the bedroom, nor do cell phones or televisions.

Résumé

If you follow all the listed points and additionally pay attention to a healthy negative ionization of your room air as well as good orgone and oranur values, you will sleep like in paradise. Your body will thank you by a sustainable health and vitality.

Unfortunately, today it is often not possible to avoid or switch off disturbances for various reasons. For these not rare cases, a biofield shaping regulation module, such as the BIOGETA® FM biofield shaper, is suitable.

How do the BIOGETA® Bio\-Wafer work?

Sebastian Krueger — Tue, 15 Mar 2016 11:09:25 +0000

The BIOGETA® bio-wafer is energized – not merely informed (!) – with strong 29,000 Bovis, in a frequency of 10h45 Hertz, and thus generates a positive field with a diameter of approx. 4 – 6 m descending.

It is able to effectively harmonize even relatively strong interference zones in a measurable and noticeable way and can also be used to energize food and water – similar to Tesla plates, only stronger.

To do this, simply place a bottle of water carefully on the bio-wafer for 30 seconds. The water then absorbs the crystalline structure of the bio-wafer and takes on the same strength of 29,000 Bovis.

When you drink this water, the body is able to absorb more energy. You can taste the difference immediately. The water tastes much softer after energization.

” What does the Bovis value mean? Where does this value come from?
“What is the difference between clockwise and counterclockwise water veins?

What is the process of earth radiation interference suppression?

Physically, each type of radiation has a certain frequency, and in this polarity in which we live also a corresponding charge.

In order to physically cancel a frequency, it is necessary to have exactly the same frequency but with opposite polarity.

In order to cancel a frequency, one must know first in which height it oscillates, in order to neutralize it then with an opposite-pole interference.

The BIOGETA® bio-wafers have exactly this ability. On the one hand, they “block” the rising radiation by interference, and at the same time build up a highly oscillating field – in likewise interfering frequency to that of a water vein, so that the entire area is harmonized over a large area.

The energy used in this process is cosmic energy, which radiates onto the earth, and is virtually bundled, or concentrated, by the wafers.

In contrast to radionically informed protective plates or similar, which quasi only protect the body on the information level, the bio-wafers physically extinguish the rising radiation. Cork plates or other materials do not manage this, because they vibrate in a lower frequency.

When installing a BIOGETA® FM Biofieldformer, the basic approach is the same. However, with the BIOGETA® FM Biofeldformer not only is extinguished, but the body is additionally balanced in the important frequency values of the geopathic disturbances as well as the electrosmog in the polarities and thus strengthened and protected.

The advantage here is that it harmonizes the entire house in a uniform fundamental frequency, eliminating all interference zones.

Important Notice:

Vibrational fields always influence each other. There is a simple rule that says that a higher vibrating field always energizes a lower vibrating field, and a lower vibrating field always takes energy away from a higher vibrating field.

A healthy person usually oscillates between 6,500 Bovis and 7,500 Bovis. Small children sometimes even a little higher. However, a geopathic disturbance zone usually vibrates between 1,500 Bovis and 5,500 Bovis. This means that the body on an irritation zone is forced to compensate for the vibration deficit. Whether it wants to or not.

It is also important to understand that the body of an adult consists of about 70% water – that of an infant even about 90% – and that water is a highly intelligent storage medium and has a – ideally – crystalline structure.

What happens after the bio-wafers are placed?

A field change first of all means an adjustment for the organism. If one has slept for many years in a very low vibrational environment, the body is used to compensate for the energetic deficit. It thus becomes more and more debilitated the longer it stays on it, and the body’s balancing impulse has often become a kind of automatism.

The BIOGETA® Harmonizer enlarges the incoming lens for cosmic life energy and provides for an increase in the available energy. The body is thus no longer required to compensate for an energy deficit and can use the nocturnal vagotonic phase for regeneration – as it should be. The body is supplied with energy again, the pineal gland produces melatonin again – this hormone responsible for our cell regeneration and reproduction, among other things. However, it often needs a few days to get used to it.

After the installation of the bio-wafers or the installation of a BIOGETA® FM bio-field former, it can (but does not necessarily have to) come for the first few days to a few adjustment symptoms such as restless sleep, difficulty falling asleep, or intense dreams. However, this is not bad, but in principle rather a good sign, then you notice that something is happening. It is a bit like in homeopathy, where a brief initial worsening is considered positive.

On this topic, I recommend reading the following blog article, where I report, among other things, about a case where the energetic change took a few days, until finally everyone was and still is very happy:

” The energetic quality of places – energetic elevation as help against earth radiation

If after the first night – in the new energetic environment – you have the feeling that you are “over-energized”, you can calmly move the bio-wafers first one or two meters further away from the bed and then, spread over a few days, move them back to the original position in several steps. After a few days – sometimes even after 2 or 3 weeks – the body will have become accustomed to the new situation and will no longer try to compensate for anything, as it has now experienced that it is no longer deprived of energy, but receives a healthy surplus of energy every night.

When using a BIOGETA® FM biofield former through the circuit, the basic energy is stable in a beneficial range. The body will quickly get used to no longer having to compensate for a deficit.

A sleep disorder should always be the first step of any form of therapy!

Important note:

I often get inquiries about what kind of energy is stored on the bio-wafers.

There is NO energy stored on it!

Energization does not mean that something is stored on it, but that the entrance lens for cosmic energy is enlarged. Simply more universal energy comes in. The only what is stored on the crystal, is quasi the instruction in which frequency and with which intensity it should vibrate. That is everything!

The frequency indicates the spectrum available for a possible interference, and the intensity is quasi the Bovis value, i.e. the size of the opening for incoming energy – but thus also for the effective radius and the strength of the harmonizer.

The effect of BIOGETA® bio-wafers can be impressively proven with the help of a modern bioresonance device. And this is related to the source of interference and not merely to the organism. I have written a separate article about this:

” Effect of BIOGETA® harmonizers confirmed by bioresonance!

Legal Notice:

Procedures and wellness products based on findings of the subtle level and radiesthesic experience are not recognized for lack of physical-scientific provability. Only doctors, alternative practitioners and other users who have dealt with this matter and use these procedures and products themselves share and confirm the positive experiences that countless people have had. There is extensive literature (with further references) on the subtle dimension, which familiarizes with the basics of the matter and aspects of practical application.

In any case, one should also be aware of the fact that “modern” orthodox medicine does not represent natural science, but is merely a model based on probabilities, or represents the views that have been “agreed upon” and are agreed upon again and again.

” Why is conventional medicine not a natural science? Are there alternatives?
“What does health actually mean? And what is disease?

Do I Have a Water Vein Under The Bed?

Sebastian Krueger — Sat, 20 Feb 2016 09:19:15 +0000

Do you have the feeling that a harmful water vein or another earth radiation zone runs under your sleeping area?

Unfortunately the old knowledge around the harmful effects of water veins and earth jets is often pushed today into the range of the pseudo sciences, and this – for our health – extremely important aspect by far not the necessary meaning is assigned.

According to this, the majority of all aggrieved people first end up with all kinds of doctors, in order to have the various symptoms, such as massive sleep problems, tension, infertility, bedwetting, sleepwalking, back pain, overstimulation, nervousness, dizziness, constant fatigue, rheumatism, cancer and many more – treated mostly unsuccessfully. In my examinations of cancer patients I always find (without exception!) water veins in the sleeping area. Mostly additionally in connection with further loads, caused by earth rays or strong electrosmog.

Move the bed or swap sleeping places

If you feel a water vein may be running under your bed, or you are sleeping on a harmful earth grid point, simply switch sleeping sides with your partner for 1 week and see what happens. Or, if possible, move your bed to another place. Often, the quality of sleep improves significantly shortly thereafter. Unfortunately, from my experience it is quite rare to find an optimal and undisturbed sleeping place. On the one hand, there are areas that are “teeming” with water veins, and on the other hand, it always takes a certain amount of “luck” to have built your sleeping place – intuitively or through building specifications – exactly between harmful earth grid points. So, if you sleep better in a different place, you can almost concretely assume that your original place was disturbed by a water vein or earth rays, but you still don’t know if the new place is just a little less disturbed or completely free of disturbances. To make matters worse, water veins can meander, that is, change their position. Especially after heavy rainfall, this can often be clearly felt. Also, the different phases of the moon can have a strong impact on both water veins and earth grids.

Kinesiology muscle testing

However, you can roughly test this out yourself relatively well. Sit upright once on the edge of your bed, stretch out your stronger arm, and ask yourself aloud, “Is this sleeping place trouble-free and good for me?” Your partner then tries to push your arm down. If you can hold it up, or it is very hard for your partner to push your arm down, the place is okay for you. If it is very easy, you can assume that the square is taking strength away from you.

You can then do the same test in a place where you instinctively spend more time and feel comfortable. That way you have a comparison. To then determine exactly what is bothering you, how high the values are, and what is best to do about it, however, requires some experience.

For a more detailed understanding, I recommend reading the two blog articles “About earth rays and water veins” and “What earth rays are there?” to read.

You want to build or buy a house. You can do that in advance!

Sebastian Krueger — Wed, 24 Jun 2015 15:51:09 +0000

If you have decided to build a house or to buy an older house, in order to convert it then according to own desires, it is absolutely advisable to let examine the potential building plot, or also the house already on it, of a examined Rutengänger or a certified building biologist for harmful earth radiation.

It is not only very annoying – once you have finished everything for a lot of money and suddenly can not sleep, seriously ill or feel weak, powerless and unwell – to find out that you have built your sleeping area or workplace directly over a water vein, but it is also very dangerous!

Likewise it is before the purchase of a real estate or a property of large advantage to consult a building biologist or Rutengänger. In China there was many thousand years even a law, which prescribed this.

If you are planning to buy a house, you should be interested not only in the energy balance, but especially in the energetic balance. Because in contrast to an object with a poor energy balance, which, in addition to the corresponding impact on the environment, is primarily noticeable in your wallet, you pay the consequences of a poor energy balance, primarily with your health, your well-being and that of your children and family.

Unfortunately, far too little attention is paid to this point in today’s world.

An experienced building biologist and dowser can give you useful advice even before you start building and can advise you on the possible positioning of the building window.

If it is not possible to completely avoid existing interference zones, however, it is often possible, through a few small planning changes, to arrange the layout of the rooms in such a way that the sleeping areas are free of radiation and also the working area, the positions of the sofas, etc….

A water vein under a toilet or a hallway is not a particularly great danger, because you will not stay there for a long time, and especially will not spend his rest. However, under the bed it can have serious consequences.

In the ideal case already the architect, with the planning of the building, aligns itself after the defaults of the Rutengänger, Geopathologen or Baubiologen. Ultimately, as it was in the past, so to speak, the norm.

I myself bought an old house years ago and wondered at first why it was not built parallel to the street, but at a slight angle to it. Only when I then examined the property with the dowsing rod, I found that two of the foundation walls run almost parallel to two water veins. There is no doubt in my mind that before the house was built (between 1913 and 1915), the property was examined for earth radiation and aligned accordingly.

Another very important point to consider when building a house is the issue of grounding the electrical installation. It is hardly more expensive to use shielded cables, sockets and lamps throughout, or to use appropriate shielding paints – rather the opposite. By doing so, you are providing yourself with a piece of sustainable health that cannot be repaired with any money in the world once it has been destroyed.

If you have the opportunity, you should check in advance, i.e. before buying or building a house, or choosing a new apartment, whether there is a mobile phone transmitter mast near the house. Also ask actively, because sometimes even in churches or schools transmitters are installed and not visible.

Recently I had exactly such a case, where a very strong transmitter was hidden in a church tower, and has burdened the entire neighborhood. You can find a recording of this in the bonus part of the video tutorial “Elektrosmog Soforthilfe”.

Check to see if there is a strong ground, or high voltage power line or railroad track close to your new home that can generate alternating magnetic fields.

You should also make sure that no electric underfloor heating, LTE repeaters or pulse-modulated smart meters have been installed. If smart meters are installed, ask whether they transmit permanently or only once a month for reading.

For the field of geopathy and to evaluate the actual exposure to technical fields or pollutants, the study of a building biologist would be recommended in advance.