I get this question very often, so I decided to write a separate article about it.
Basically, it doesn’t matter if someone has been on site before and installed or buried any shielding mats, magnetic discs, radionic harmonizers, or other items to shield or redirect earth rays or water veins.
I always measure the “actual” condition on site. And not with a dowsing rod, but first of all technically, with a modern bioresonance device. This device contains, among other things, all frequencies of geological disturbances – such as water veins, faults or global grids. By means of a resonance test, it is then possible to determine very precisely what kind of disturbance it is. One measures with it the frequency spectrum, which prevails at appropriate place – mostly the sleep place.
If a harmonization of another dowser or one of the innumerable suppliers of interference suppression devices, was made before, there are basically only three possible states.
1. body balanced – no interfering frequencies present
If the previously installed interference suppression is a shielding mat or magnetic compensation mat, I should no longer be able to detect a geopathic frequency spectrum with my measuring device. By shielding, the sleeping place should then be free of these frequency values. If I can still measure corresponding frequencies, the shielding does not work. I personally have not found such a mat in my daily work. A real cancellation of the frequency can only be achieved by interference. However, one can decouple a field by a certain construction method. However, this is primarily a matter of the type of construction rather than the material used.
2. body balanced – interference frequencies present
If it is a pure biofield shaping, the body is balanced by the previously installed device on the interference zone. The disturbance including the disturbance frequencies are then still measurable and present, but the body has no disturbance in the corresponding regulatory frequencies. This can also be wonderfully determined with a bioresonance device in the body of the person living there. Basically, this is one of the basic checks of any therapist or alternative practitioner before a therapy can begin. He checks if there is a stress caused by a geopathic disturbance, which can endanger an intended therapy success.
During a house examination I also start with this step, and examine the people living in the house for stresses caused by geopathic disturbances, electrosmog and often even pollutant and mold infestation. As a non-medical practitioner and certified bioresonance therapist, I am allowed to carry out such examinations on site, and it then usually becomes directly apparent in which direction I need to search. If a load is indicated by a water vein, the probability is very large that I find this then also at appropriate sleep place. If in such a case a harmonization of another provider is already active, it will expose itself directly as ineffective. Unfortunately, I experience this very often.
There are also said to be devices that do not regulate or balance the body through active biofield shaping, but whose goal is to render a still measurable interference zone harmless to the human body. These are often radionically informed objects positioned in the room or connected to the electric circuit as an information system.
Here, too, one can very well determine whether the whole thing is working properly by examining the body after about 3 months. My experience has shown that a body that has been massively disturbed by a geopathic irritation zone for years, will have reduced this disturbance after a maximum of three months, as soon as the stress is removed. If someone comes to my practice today and I measure a strong polarity shift in his organism in the frequency range of a water vein, and I relocate him to a place free of disturbance or put a bio-wafer under his bed, I will no longer be able to detect this stress in him in about three months. The body will then have regulated it away itself.
So, if the purpose of an interference suppression device is to render a stress harmless to the body without actively regulating it, I should still not be able to detect any more stress in the person after 3 months at the latest. If I do, the interference suppression will not work. By the way, these tests can be done not only by me, but by any good alternative practitioner or therapist. Either with bioresonance, kinesiological, radionic, or radiesthetic.
3. body not balanced – interference frequencies present
Unfortunately, this is the case that I encounter most often. In more than 99% of all cases, where an interference suppression has been installed before, I find strong loads due to geological disturbances and always also due to electrosmog in the body of the persons living there. Additionally – or underlying this – I can measure the corresponding frequency spectra of the interference zones then also at the sleeping places. Of course, this can also be due to the fact that I am primarily called to people who have problems and for whom the previously installed objects obviously do not work.
If you are not sure whether an interference suppression measure actually works, I advise you in any case to have yourself checked by an alternative practitioner with bioresonance. Independent of the subjective perception – e.g. concerning your sleep – you will find out whether your organism is exposed to a weakening interference zone.
Notice:
At this point, I can’t help but mention that both a BIOGETA® Bio-Wafer and a BIOGETA® FM Biofieldformer create a truly interference-free space. With both differently constructed devices, after installation no more interference zone can be measured locally with a bioresonance device.
Likewise, at a later bio-check with bioresonance, no more disturbance in the body is detectable. This has always been the case without exception – mostly the check was done by a therapist unknown to me.
At this point, however, it is important to distinguish how the individual devices work.
Whereas the BIOGETA® FM Biofeldformer actively balances the body and treats it directly, the Bio-Wafer merely deletes or blocks the interference zone. This has the consequence that after the application of a BIOGETA® FM bio-field shaper often already after a few days no geopathic disturbance is determined (also no load by electrical smog), whereas with the application of a BIOGETA® bio-wafer the body needs up to 3 months, in order to regulate the – often for a long time – existing disturbances away.
” More information about the different de-pulping possibilities
” Detailed information about the BIOGETA® Bio\-Wafer
