Info topics – Radiation-Free-Living.com

Water Veins Under the Horse Stable, Cow Barn, Piggery or Poultry Enclosure

Sebastian Krueger — Tue, 28 Sep 2021 09:22:10 +0000

Radiation seeker / radiation evader

As I have previously explained in detail in another article, in nature, animals and plants belong to two groups known as “radiation seekers” and “radiation evaders”.

Many herbs grow in places with high radiation, as do some trees such as oaks or elderberries.

In the animal world it is mainly insects that are radiation seekers. They love these places and even need them to live.

For example, bees in the wild always choose places in high radiation zones, such as water veins or faults, to build their honeycombs.

In contrast, most mammals are radiation evaders. They suffer in geopathically disturbed places, such as water veins. If they remain in these places for long periods of time, they lose their vital energy and become ill.

Cats and rabbits are exceptions, as they probably like to stay in disturbed areas due to the polarity of their fur.

Humans also belong to the group of radiation evaders. This has been known for hundreds, if not thousands of years, although it has been ignored in today’s medicine or science, for unethical reasons that I cannot explain.

This article for once is not about us humans, but about animals. Specifically those that are kept in stables, forced to stay for a long time on energetic fields mostly against their natural instincts, since they would certainly avoid this in the wild.

Unlike us humans, animals are still connected with their instincts. They know intuitively what is good for them and what is not.

On a side note, here is a thought I’m unable to withhold:

Due to the current way of building – in which the position of the building window, the orientation of the house, as well as the position of the bedrooms are not decided intuitively by the people who will live there, rather by architects, city councils or developers – most people live like animals in stables.

The difference is that the “prison” is probably more people’s minds and not, unlike in animals, whose prisons are behind bars ;).

Over the past 8 years I have received a number of emails, phone calls and inquiries from many horse owners, or pig farm owners, farmers with stables and large poultry farms etc., telling me that there were areas in barns (of all sizes), where animals were constantly getting sick, being very aggressive or dying.

For me, as a vegetarian, it has always been unpleasant to travel to a pig farm, and it’s worth adding that f I were a chicken, an organic poultry farm wouldn’t exactly be my hotel of choice either…

Next, I will write a few sentences about the different “livestock” groups and recall some of my practical experience on how I proceed in each case to optimally harmonize horse stalls, stables or enclosures.

Horse stalls on a water veins.

Horse owners still have a widespread general knowledge that a water vein under the stall represents a high risk to the horse’s health.

Horses are very sensitive to water veins, faults, Benker cubic grid lines and junctions, Curry grid junctions and negative Hartmann grid junctions.

I have heard quite often from horse owners that horses get some sort of asthma or bronchial infection from staying over a water vein. This often end in fatality .

A good friend of mine lost her horse this way. Unfortunately, I found out too late.

She was aware that there was a water vein under the horse’s stall and following the advice of an amateur dowser, she had copper plates dug out, which unfortunately don’t do any good, and so they didn’t do any good for her!

You cannot shield a water vein with copper plates. Nor with cork plates!

I cannot say for sure whether a horse gets asthma from a water vein or not.

What I can say, however, is that staying permanently in an area of strong disturbances such as a water vein, can potentially lead to draining all the energy of the poor animal, which in turn, over time, is no longer able to fight infections, even if its immune system is still functioning properly.

The animal becomes susceptible to diseases, allergies, viruses and bacteria, due to the fact it is trapped in a small box every day and unable to get out.

By the way, freerunners don’t have to face this issue.

How can we remove a water vein under a horse stall?

We receive requests of this kind quite frequently and I usually recommend the following procedure:

The first thing I always try to do is find out if there is a way for the horse to move to an unstressed stall. Sometimes you have to modify the stall for that purpose.

If this is not possible, a Bio-Wafer can be embedded in two opposite corners.

The corners are always recommended since the horse is unable to step on them. Also because this creates a clockwise field from both sides, thereby balancing the existing interference zone.

In addition, we recommend installing a BIOGETA® FM Biofield Former for the barn. Most of them have a pipe running through the ceiling.

The radiation is usually sufficient to achieve basic regulation in the barn, which helps the animals against radiation from cell phones, and also against geopathic stress caused by water veins or faults.

The right size to choose depends on the area (square meters/feet) of the barn, but also on the number of lines.

If you have any further questions about the topic, please do not hesitate to call us.

Water veins in the cow barn.

As previously mentioned, cows are also very sensitive to water veins and other types of “negative” earth radiation.

How to get rid of water veins in a stable?

On cow stalls is well noticeable how severely radiation-avoiding animals react to interference zones. I once contacted a dowser who specialized in agriculture and drew up layouts of the stables, in which she gave each one a value.

Less loaded box = low value

heavily loaded box = high value

She noticed that in all the boxes with high values, the cows did not produce any milk, were very aggressive or there were repeated calf deaths and frequent abortions.

To harmonize a cow barn, I would use one or several FM Biofeldformers, as cow barns usually have a lot of pipes and therefore Biofeldformers can be very usefull.

If there aren’t sufficient lines available, I’ll have a cable drum laid out along the drinking troughs, which is connected to the power grid to which an FM Biofieldformer is connected.

Pig barns exposed to earth radiation.

The procedure in a pigsty is basically the same as in a stable. The difference is usually that the mother pig is stuck in a small place and has almost no room to avoid any failure zones. You really don’t want to see that…

It remains to be seen whether harmonization would really do anything in this case.

Chicken coops / free range enclosures.

When it comes to chicken farms, I’m not talking about cage housing where chickens are kept in a minimal amount of space. I see this similar to the fattening pigs.

In smaller free-range hen houses, just like with horses, Bio-Wafers can work very well embedded in the ground. Thanks to this the chickens can find good places to sit around the device.

In larger enclosures we have had very good experiences with our FM Biofelformers.

A few years ago I received a call from Austria, where on a larger farm, due to a bird flu alert, all chickens suddenly had to be evacuated to a large indoor enclosure. But the enclosure was too small for the masses of chickens (a shed).

There was a larger area in the aisle where, on a daily basis, many chickens chewed each other to death and there was not enough room to get out.

Following my recommendation, a cable drum was placed around the area and connected to the electrical grid with an FM Biofeld Former.

From that moment there were almost no more dead chickens.

I had a similar case with a large German organic poultry farm. There we have also treated the water with a water shaper.

Conclusion.

If one of your animals is not ok and you don’t know exactly where the disease, weakness, allergy or susceptibility to infection is coming from, try looking in this direction. Although many people do not want to admit it or believe that it is just a trick or a discard of the imagination:

Animals react like plants and humans. We are very sensitive to energy imbalances such as those caused by water veins.

An Email from a Client

Sebastian Krueger — Fri, 12 Feb 2021 09:15:05 +0000

I recently received an email from a client with a photographed excerpt from a book on the subject of EMF exposure. Among those are electrosmog (household electricity) and radio (microwave) exposure.

The author’s quote refers to the fact that, in general, we should be very cautious with harmonization products that supposedly promise to be able to somehow compensate for electromagnetic stress.

He writes that the body always reacts with corresponding symptoms and that, in his opinion, for a person with no knowledge of the subject, it is very dangerous to blindly trust the reliability of a balancing product.

The customer’s concern and his email are very justified, because this is precisely what distinguishes us here at BIOGETA from many other manufacturers.

This was my response:

Dear Mr. XXX,

Thank you for your email and for the excerpt from Dr. Mercola’s book.

As a construction biologist, I have to agree 100% with Mr. Mercola. I always get the goose bumps when I hear or read advertisement texts of some harmonizing product manufacturers, things like:

~~“From now on your electricity is healthy”~~, or ~~“Your cell phone is now a therapeutic device”.~~

The idea is to ALWAYS use a harmonization product to balance a residual charge that cannot be disconnected or shielded.

That is why you have received, together with your Biofeldformer, also a book and a video course, in which I explain exactly how to reduce the tensions within your own four walls to the minimum necessary, to effectively balance the rest by making use of the Biofeldformer.

An FM Biofeldformer is basically a bioresonance device. In other words, restoration of the organism takes place after stress. It may look like a direct compensation, but it is basically a recovery that takes place immediately. Like a direct therapy.

However, it is impossible to eliminate the thermal effects if you hold your cell phone directly to your ear. They are and will remain microwaves! You can only get rid of them by turning them off or shielding them completely.

But then you won’t get reception…

I myself can feel whether the WIFI is on or off at night, despite the Biofeldformer. But when I do a bionergetic measurement, however, I no longer detect any tension in my body as long as the Biofeldformer is active.

Every time I deactivate the Biofieldformer, I can feel the stress much stronger. I also measure massive disturbances through high frequency directly in my body.

This can be extremely perceived in a car. For instance, when I make many phone calls in the car, I can feel a clear difference, especially in my subjective perception, when the Biofeldformer is active or and when it is not.

The best way to protect yourself when you are in the car is simply not to talk on the phone and – very important (!) – to deactivate the Bluetooth on your cell phone, otherwise it will keep transmitting constantly and will want to connect to the cell phones of other vehicles at every traffic light.

You may be wondering why I’m showing you the client’s email and my response to it here.

And the answer is:

I write it because for me it is very important not to just recommend a device that you easily plug in, but then without any effect whatsoever, you are still blindly exposed to radiation.

During my active time as a construction biologist, with almost daily examinations in residential buildings, I always worked according to my formula of the Six Building Blocks.

Here I summarize them briefly, as I have previously described them in detail elsewhere:

Educate

Avoid

Turn Off

Shield

Balance

Build up

The balancing is only done at the end. It is done by a balancing module of any kind and it is done only for the residual load that is impossible for us to get rid of.

But beforehand you should try to reduce the exposure to the absolute minimum by disconnecting, shielding and avoiding, and then, ideally, only compensate for the residual exposure.

A large part of the radiation usually comes from within your own four walls.

Therefore education is always at the forefront. It will know what to do this and what to look out for.

And this is exactly what the Radiation Free Living blog, videos, emails, the Elektrosmog Guidance and Support book and the corresponding video course are for.

Only in the case of earth rays we have to rely completely on a functioning compensation option, because earth rays can neither be shielded nor safely avoided in the long run.

They can change or arise again….

And this is where our FM Biofieldformer devices definitely come into play. I can personally state that I know of no other system that balances geopathic interference zones as reliably and measurably as the BIOGETA® FM Biofieldformer .

And it is also worth adding that in all the years of practical use I have come across many products….

Construction biologist Andreas Grohmann wrote about this in a public post on a large construction biology forum:

“I would like to refer once again to BIOGETA’s Bio-Wafer and FM Biofeldformer. The moment I start using these modules, I can no longer detect any of the geopathic disturbances that I had previously measured with my PS10!”

Note: PS10 is a bioresonance device for the reproducible definition of terrestrial radiation in building biology)!

If you haven’t yet read the article on the Six Building Blocks, you might wonder what the sixth block “Build Up” means.

The goal is to rebuild the energy system and keep it stable.

For example, by drinking good, clean water, eating nutritious food or with the help of an energy booster, such as BIOGETA® Bio-Wafer “Active”.

But please do not fall into the “comfort trap” by saying:

“Well, I am just going to balance it all at once, put a Bio-Wafer in my pocket and therefore I will be able to sleep deeply, while laying next to my WIFI router”

All you have to do is sleep next to your neighbor’s router

On Sleep Disorders and Childhood Illnesses.

Sebastian Krueger — Tue, 24 Nov 2020 15:39:43 +0000

Many people are unaware that being exposed to disturbances in sleeping areas is, in many ways, an excessive stress on the organism.

The fact that the vagotone or parasympathetic nervous system, which is a very important regulatory phase of the human body, is disturbed night after night as a result of sleeping or being located for extended periods of time in geologically disturbed areas, or by the effects of electrosmog, in addition to the constant release of stress hormones such as cortisol and adrenaline, which continuously overacidify the organism, all this creates an environment that favors the colonization of viruses, bacteria and fungi in the human body.

Otto Warburg received the Nobel Prize for Medicine in 1931 precisely for this discovery.

Children are often massively exposed to the effects of this.

Very often I have experienced that during a home examination in several children’s rooms, one of the children used to be significantly weaker and more susceptible to illness than the others.

It is true that some genetic predisposition may play an important role in this, but so far it has always been the case that the places where the weak and sick children used to sleep were precisely those with more disturbances, compared to the other beds where the children were in full health.

On the other hand, the healthiest children, who according to their parents almost never got sick and have no psycho-social behavioral problems, have always slept in very conveniently located neutral beds. When I say “conveniently located” I mean, for example, a clockwise water vein with balanced magnetic values.

In some cases, the mother or father of the children told me that as far as the so-called “children’s diseases” were concerned, the children who slept in good beds did not contract any of these diseases or, that in cases where they did get sick, they were quickly able to regulate them within a matter of a just a few days, thanks to an intact and well-developed immune system.

This was the same for my two daughters, for example. In our case, rubella lasted only 2 days.

On the contrary, the children who slept in bad places tended to have a much longer duration of the disease and were much more ill than their siblings.

Case Study of "little Myra

In one of the clinical records I have written, entitled: “Little Myra”, I outline the case of a one and a half year old girl who was diagnosed by a pediatrician as “having a congenital and therefore incurable immune defect”, with the prognosis that her illness would be chronic for the rest of her life and that she would react to many foods with intolerances.

Not to get too far ahead of myself, I can only say that today the little girl is not only in very good health again, but probably better than ever.

It was not herself who was sick, it was her sleeping place!

This disturbed place simply put her under so much stress that her body no longer had the strength to protect itself against external infections, viruses and bacteria.

» Go to the blog post “Little Myra”.

Do smart children have more trouble falling asleep?

Recently, while searching on the Internet, I came across a forum where the members are people who have sleeping problems or whose children have sleeping problems.

In the forum all kinds of possibilities were discussed and offered. Snoring labs, sleeping pills, special homeopathic pills to help sleep better, special pillows, mattresses, beds, etc.

Most people believed that very intelligent children simply tend to fall asleep badly and wake up early.

I searched for a long time, and could in fact find nothing in none of the major mainstream magazines or well-frequented forums and blogs, that made reference to the fact the sleep problems of children and many adults are caused by technical fields in the house, as well as by microwave pollution (WIFI, cell phones, radars, etc.), which penetrate from outside into the bedroom or may also be caused by geological interference zones.

However, this is precisely the reason for most sleeping disorders in children! Something that has been known for 500 years in all health books and writings that were written before the time of the great power of the pharmaceutical lobby, and explicit reference is made to it.

Paracelsus already said more than 500 years ago:
“The most secure method to ruin your health, is a SICK BED!”

There is a big difference between efficient and effective action.

Efficient means doing or carrying out a certain task to the best of one’s ability and as thoroughly as possible.

For example, taking someone with sleep problems to a laboratory, measuring their brain waves and collecting as much informative detail as possible.

An effective approach describes doing the right thing to get the most satisfactory result possible.

In this case, an effective approach would be to change the sleeping location, shield the technical fields and compensate for geological disturbance zones.

I am quite sure that the desired result, in this case, better sleep and consequently better and sustainable health, can be achieved through the latter of the two points.

Recently, while searching on the Internet, I came across a forum where the members are people who have sleeping problems or whose children have sleeping problems.

In the forum all kinds of possibilities were discussed and offered. Snoring labs, sleeping pills, special homeopathic pills to help sleep better, special pillows, mattresses, beds, etc.

Most people believed that very intelligent children simply tend to fall asleep badly and wake up early.

I searched for a long time, and could in fact find nothing in none of the major mainstream magazines or well-frequented forums and blogs, that made reference to the fact the sleep problems of children and many adults are caused by technical fields in the house, as well as by microwave pollution (WIFI, cell phones, radars, etc.), which penetrate from outside into the bedroom or may also be caused by geological interference zones.

However, this is precisely the reason for most sleeping disorders in children! Something that has been known for 500 years in all health books and writings that were written before the time of the great power of the pharmaceutical lobby, and explicit reference is made to it.

Paracelsus already said more than 500 years ago:
“The most secure method to ruin your health, is a SICK BED!”

There is a big difference between efficient and effective action.

Efficient means doing or carrying out a certain task to the best of one’s ability and as thoroughly as possible.

For example, taking someone with sleep problems to a laboratory, measuring their brain waves and collecting as much informative detail as possible.

An effective approach describes doing the right thing to get the most satisfactory result possible.

In this case, an effective approach would be to change the sleeping location, shield the technical fields and compensate for geological disturbance zones.

I am quite sure that the desired result, in this case, better sleep and consequently better and sustainable health, can be achieved through the latter of the two points.

The Benker cubes grid – Why it is so dangerous

Sebastian Krueger — Thu, 06 Jun 2019 12:13:23 +0000

At this point I would like to go into more detail about the Benker cube grid, since I often encounter this grid in my daily work, usually in connection with severe health problems of the people concerned.

What exactly is the Benker-Kuben grid?

The Benker cubes grid is a radial, i.e. three-dimensionally arranged grid system, which is built up from cubes alternating in polarity. It is one, respectively the main component of the global grid and it does not count to the earth rays, because it does not come from the earth!

Where exactly the grid comes from and what it really is, we do not know. But we do know that it is a magnetic grid system, which has specific energetic qualities. And that it is really considered by very few building biologists, dowsers or radiesthesists.

The increment of the individual cubes (cubes) is 10m by 12m, aligned north/south east/west. At least that is the theory. In practice, however, it often turns out to be somewhat offset and sometimes only appears in fragments, or shifts.

Eric Walker, a fellow building biologist from Hong Kong, recently gave an interesting talk on the Benker grid in a major city, documenting with many pictures that the Benker grid can be derived and fragmented from reinforced concrete, construction cranes, etc.

In many apartments there are only fragments of the grid lines to measure. In some cases it also shifts. I myself have to do in my analyses also frequently with the Benker grid and can confirm that the grid can be derived by metals – e.g. a balcony grid made of metal – and often “jumps”. And also that it “wanders” with the moon phases in rare cases.

Anton Benker

The grid was (re)discovered by Anton Benker. Hence the name. About the origin there are different theories, but basically we don’t know exactly. Some speak of an information guidance system from ancient times – comparable with the ley lines, others try to explain it via the earth’s rotation.

The energetic and health effects are felt by many people in any case – even if the symptoms are often attributed to ignorance or ignorance, other possible causes or simply coincidence.

Health effects

For example, if one sleeps on a Benker line, the body is depolarized quasi-constantly because the neighboring cubes have different polarity.

According to Anton Benker, it also makes a difference whether one sleeps in a minus or plus cube, and depending on the polarity, other geopathic interference zones also behave differently. On an undisturbed place in a minus cube one sleeps more restful and deeper, but geopathic disturbance zones have a stronger effect. In a plus cube, one can “bear” other disturbances more easily, but does not have such a deep sleep overall. There is also the idea that e.g. wild animals on their game paths balance themselves out in the polarities by the permanent run through the differently polarized cubes.

With the help of the Rayocomp PS10, we can exactly display the frequency of the Benker grid, and thus create a resonance to the lines – and thus precisely locate them. So you don’t have to “guess” with a dowsing rod whether such a line could be there, but you can measure it reproducibly today.

Bioenergetics

Bioanalytically, a Benker line can be determined by factors that are always constant, such as the Bovis value and the magnetic pulsation force. A Benker line has a stable Bovis value of 6,000 Bovis and a magnetic pulsation force of less than 5%. As a result, it appears very tiring and “stressful”. Sleep is usually very restless and one does not find rest.

People who sleep on a Benker line for long periods of time are often very drained of energy and constantly exhausted. Often these people report weakness, muscle pain, joint pain, and/or neurological as well as cardiac problems.

The geopathic supergauss is the Benker cube cross – i.e. a crossing point of two Benker lines. This has only about 1000 Bovis and has an extremely energy-sapping effect. In addition, the magnetic pulsation force, i.e. the bioavailability, is almost zero, and the body is constantly stressed. In other words, the vegetative nervous system is permanently kept in sympathetic mode.

In my most severe health cases I usually find a Benker cube cross in the sleeping area – often additionally in combination with further geopathic disturbances like faults, water veins or curry grid crossings.

Dr. Hartmann, who in his discoveries and descriptions of the Hartmann lattice named after him always spoke of the dangerous double lines, basically meant the Benker lines.

Magnetic grid

Since the Benker grid is a magnetic grid, it is also likely that electrosmog – and especially high frequency – can also couple to the grid. This would explain, for example, that some people experience a sharp increase in Benker complaints when, for example, a WLAN is switched on.

I must confess that for a long time I myself did not give enough importance to the Benker grid, because I did not learn about this grid in my dowsing training, nor in the common literature. Today, many symptoms are often explained to me by taking it into account.

In my investigations, I now recommend avoiding the Benker grid if at all possible.

From a therapeutic point of view, the Benker frequencies can be balanced very well by biofield shaping with the BIOGETA® FM Biofieldformers. This also immediately improves sleep for many people.

However, I believe that we are not yet able to assess the Benker Grid correctly – e.g. if there are connections to technical fields, so I usually try to avoid the Benker Grid in my harmonizations and if necessary I prefer to compensate for a water vein or a fault line – of course only if the local possibilities allow it.

But with the evasion it is unfortunately such a thing, because already too often I have experienced suddenly newly appeared faults, water veins, jumped Curry grid intersections and even already wandering Benker lines. For this reason I always recommend to install an additional biofield formation. But more about this in another place …

Symptoms due to Benker cubes grid

As mentioned above, I very often encounter Benker cubes grids in the sleeping areas during my analyses and harmonizations. I suppose this is due to the fact that the discomfort caused by a prolonged stay on a Benker line – or even worse on a Benker intersection – usually causes a higher level of suffering in the affected people than, for example, a water vein – which may not even be noticed by many people, because there is a natural compensation for these frequencies in nature in many places.

In other words, people with a Benker-Kuben strain tend to look for solutions to their sleep problems more often than people with other strains. But as I said, this is just my guess.

MS (multiple sclerosis) through Benker cubes lattice?

Whether there is a direct connection between MS and the permanent stay on a Benker cube grid, I cannot say with certainty. However, in the last two years, I have not seen a single case of MS in a client (and unfortunately there have been a few) who had multiple sclerosis – but there was no disturbance of the sleeping area by a Benker cube intersection. Not one!

I therefore suspect a connection. It is not that the Benker grid triggers MS, but that the permanent depolarization permanently stimulates the nervous system – and thus the nerve receptors, so that any existing inflammatory processes heal during the day (vagotonus), and the healing is interrupted again at night (sympathetic nervous system).

This leads to a growing scarring (sclerosis) of the myelin in the nerve endings and thus ultimately to communication interruptions. As I said, this is only my theory – but it makes sense to me.

Possibly there are also Borrelia and/or a poisoning by mercury, which attacks the nerve cells before, a mental motor conflict according to GNM (Hamer) … and with a bit of bad luck it is then called MS in orthodox medicine.

3 points

In my three most severe cases, each involving young people unable to walk or move in a coordinated manner, all three conditions were met:

There was a stark self-esteem conflict before the onset of the first MS episode
All slept for a long time on a Benker cubes crossing point
All of them were found to have mercury exposure with the help of bioresonance testing.

On the other hand, I experience many cases of exposure to Benker cube lines or intersections that do not result in MS, but do result in other sometimes severe symptoms.

Here are a few examples:

Case:
Middle-aged woman with severe depression, multiple spinal surgeries without improvement of back pain, insomnia, complete lack of energy, unable to work for several years, physicians are at a loss.

Load:
Sleeps for 8 years on Benker cubes crossing point plus warp longitudinally through the bed, plus Curry grid crossing point at hip area.

Case:
Middle-aged man with severe depression and suicidal ideation, insomnia, complete lack of energy and exhaustion, doctors are helpless

Load:
Sleeps on Benker cubes intersection for several years.

Case:
Young man with severe burnout. Had to be picked up from work by emergency ambulance because he felt like he was burning from the inside. Unable to work for 8 months, doctors at a loss

Load:
Slept on Benker cubes intersection for several years.

Case:
Man in his early 40s with most severe cardiac arrhythmias, nocturnal breathing pauses, sweating, multiple emergency room admissions with cardiac catheter examinations, fatigue, unable to get to sleep, waking up at night and unable to fall asleep, restlessness.

Load:
Benkerline longitudinally through the entire body, plus warp transversely through sleeping area.

Case:
Woman in her mid-40s completely exhausted, MS diagnosis, severe spasticity, depression, sits in wheelchair, cannot keep up vitamins although much is supplemented, complains of Benker-typical sleep in the form of severe restlessness, waking up and not being able to fall back asleep, morning exhaustion and complete lack of energy.

Load:
Sleeps on Benker cubes intersection plus warp across bed for 8 years.

Case:
child extremely behavioral and aggressive, mother psychotic and in the apartments below constantly cancer cases, heart attacks and other diseases

Load:
In both bedrooms under the beds Benker crossing points with warping through the head area.

(see case history “A house that makes you sick“)

I could add many more cases to this list. Again and again in my home analyses I meet people, some with severe health problems, where the sleeping space is disturbed by the Benker-Kuben grid. The additional difficulty with many cases is that for some reason the Benker grid causes a kind of withdrawal symptom when the places are equalized or the beds are moved.

As a rule, someone who has slept for a long time on a Benker cube line or a crossing point often feels an inner restlessness for several weeks afterwards, even on a trouble-free place, until the body has regulated out the stress. With children, this usually happens much faster.

About sleep problems and childhood diseases

Sebastian Krueger — Sat, 17 Feb 2018 15:03:08 +0000

Many people are not aware that a disturbed sleeping place puts a massive strain on a person’s body in many ways.

The fact that the important regulatory phase of the human body, the vagotonus or parasympathetic nervous system, is disturbed night after night by a stay in a geologically disturbed area or by the effects of electrosmog – in addition to which the continuous release of stress hormones such as cortisol and adrenaline continually overacidifies the body – creates an environment that favors the colonization of viruses, bacteria and fungi in the human body. Otto Warburg was awarded the Nobel Prize for Medicine in 1931 for precisely this finding.

Especially in children this often has massive effects. Very often I have experienced that during a house examination with several children’s rooms, one of the children was often overall significantly weaker and more susceptible to illness than the others.

Certainly, a certain predisposition may also play a role, but so far it was without exception in every case that the sleeping places of the weak and sickly children were disturbed many times more than the other beds.

On the other hand, the fittest and healthiest children, who, according to their parents, are hardly ever sick and have no psychosocial behavioral problems, have always slept in neutral or very good beds. By very good I mean, for example, on a right-turning water vein with balancing magnetic values.

In some of the cases the mother or father of the children told me that it also happened with the so-called childhood diseases that the children on the good bed places, either did not get childhood diseases, or could regulate these very quickly within a few days by an intact and well-developed immune system itself. This was also the case with my two girls.

Whereas the children on the bad sleeping places, mostly had to register clearly longer courses of illness, and it went to them also altogether around some worse, than their brothers and sisters.

In one of the case histories I have written down, entitled “Little Myra”, I describe the case of a little 1.5 year old girl who was diagnosed by a pediatrician with a congenital and therefore incurable immune defect, with the prognosis that she would be sickly for the rest of her life and would react to many foods with intolerances.

Not to prejudge too much, I can only say that today the little one is not only doing very well again, but probably better than ever. First and foremost, it wasn’t HER that was sick, it was her sleeping space. This disturbed place, has only stressed her so much that her body no longer had its own forces to be able to protect itself against external infections, viruses and bacteria.

Earlier, while googling on the internet, I came across a forum where people meet who have sleep problems, or whose children have sleep problems. There are all sorts of options discussed and offered, from snoring labs to sleeping pills, to special homeopathic globules to help you sleep better, special pillows, mattresses, beds, etc.

It is speculated that especially intelligent children, tend to fall asleep badly and wake up early and what not else …

I have searched for a long time, but in fact I have not been able to find in any of the mainstream magazines or heavily frequented forums and blogs, serious evidence that the sleep problems in children and also in many adults, can be caused both by technical fields in the houses as well as by microwave pollution (WLAN, mobile radio, radar, etc.), which penetrate from the outside into the bedrooms are triggered, or by geological interference zones.

Especially the knowledge about the latter point is already present for more than 500 years in all health books and transcripts, which were written before the time of the big power of the pharmaceutical lobby, and it is explicitly pointed out. Already Paracelsus said more than 500 years ago “a sick bed is the surest way to ruin health”.

There is a big difference between efficient action and effective action. Efficient means doing or performing a certain task in the best possible way and as thoroughly as possible. For example, taking someone with sleep problems to a sleep lab, measuring their brain waves, and writing down every possible detail of information.

An effective procedure describes doing the right thing to get the most satisfactory result. In this case, an effective approach would be to change the sleeping place, to shield from technical fields, or to compensate for geological interference zones.

I am very sure that the desired result, namely a better sleep and consequently a better and sustainable health, can be realized by the latter of the two points.

The good place

Sebastian Krueger — Sat, 07 Oct 2017 19:35:25 +0000

Unlike our ancestors, we no longer live in harmony with Mother Nature, and have forgotten to listen to our feelings and trust our intuition.

Every animal in nature instinctively looks for its “good place” to sleep and regenerate. We humans, however, live for the most part in predefined grids, such as firmly defined building windows, assigned sleeping areas, and under constant irradiation from cell phones, transmission towers, digital radios, high-voltage lines, and WLAN.

And even if we have developed more and more into technological bio-robot-drones during the last 100 years, we are basically still “human-animals” and react, like the animals with corresponding reactions, or disorders, which we then however try to classify as modern disease patterns.

That is why it is more important today than ever to find your personal “good place”.

Unconsciously, we humans, like animals, behave in many ways purely instinctively. The major difference between us and animals is that at some point the conditioned mind switches on and rationalizes our instincts. Nevertheless, the vast majority of processes also take place on an instinctual level.

Thus, during our normal daily routine, we would never voluntarily stay for a longer period of time on interference fields. Most of the time we do not know that there is a water vein or another source of disturbance, but we become restless, nervous and leave the place for some reason advanced by the consciousness.

For a short time the stay on such a zone is also not harmful. There are, as I said, even points that donate energy in the short term, or drain excess energy and disturb only after a longer stay.

However, at night, or when we sleep, things are completely different. Here we can not avoid and it is the phase that our body needs to regenerate. Our autonomic nervous system consists of the two “antagonists” sympathetic nervous system (awake state, adrenaline, action, etc.) and parasympathetic nervous system, or vagotonus (sleeping, regenerating, refueling, etc.).

So, if our vagotonic phase is disturbed every night because the place where we sleep is located on a disturbance zone, or is polluted by technical fields, it brings the whole organism out of balance, and the person becomes weaker and more susceptible to diseases.

Likewise, the melatonin production, so important for our regeneration, growth and reproduction, takes place at night. This hormone, produced by the pineal gland, is said to have, among other things, a cancer-inhibiting and cell-regenerative effect, in addition to the direct connection to the third eye.

Therefore it is all the more important to look for or create one’s own good place. Through the right choice of the sleeping place, the workplace and the rest areas, the shielding or reduction of technical fields or the active balancing of the regulatory frequencies in the body.

” Next post: What are the types of earth radiation?

Case history: natural bioresonance

Sebastian Krueger — Sun, 24 Sep 2017 21:48:20 +0000

A few days ago a beautiful case happened to me that shows the natural and simple logic of bioresonance in a natural process.

I had an appointment for a house examination and, as usual, I started by doing a bio-check of the people living in the house. For this I use a small bioresonance device (Rayocomp PS10 from the company Rayonex) to test whether there is a stronger exposure to electrosmog or earth radiation.

As a rule, this almost always makes it possible for me to tell the residents exactly who is sleeping where during the subsequent sleeping place examination. Because it predominantly coincides with the previously measured disturbances in the energy field of the persons.

In this case, however, it was the case that the measurement of the young lady showed an exposure to a Benker line, but no geopathic disturbance. However, during the later sleeping place examination, besides the Benker line, a strong fault was found. How is this possible? I was a bit confused at first, especially since the lady’s partner only sleeps in the bed 3 days a week, but a strong stress due to the fault could be measured in his case.

She then also told me that her dog regularly sleeps right on the warp next to her in bed. This then confused me even more….

But the whole thing should quickly resolve and explain itself.

When I examined the practice room of the resident in the basement, I found a wide, strongly dextrorotatory water vein with over 16,000 Bovis and very high magnetic values. A part of the therapy sofa was exactly in the vein. And on this part mostly sat the dog.

Due to the constant stay on the right-swinging – and highly energetic field, both the dog and the resident of the house and operator of the practice, were able to balance the fault in the sleeping area. With her this was even measurable – in the form of a balanced polarity ratio in the frequency ranges, which are normally disturbed by a fault.

I have described a similar case here:
https://strahlenfrei-wohnen.de/das-kranke-bett/

For this reason, during the bio-check at the beginning, I could not measure any stress from the warp in her bed. However, the partner rarely stays in the practice, and therefore does not get a polarity balance in the corresponding frequencies.

Earth radiation interference suppression – What does effective mean?

Sebastian Krueger — Sat, 23 Sep 2017 21:57:09 +0000

During the production of regulation modules, the subsequent series of tests and the questions that regularly arise in practice about the functioning and effectiveness of the regulation modules, one question in particular comes to the fore.

To wit:

What does effective mean, and how exactly do I define effectiveness?

The measurement criteria for evaluating the functionality of interference suppression or harmonization products can be divided into the following two groups for this purpose:

Group 1:

Subjective sensations

That is, how does harmonization feel to the person?

A few examples of this would be:

Does he sleep better? Do existing symptoms disappear? Does it feel calmer? Is there less arguing? Does the air feel clearer? Is there less dust?, etc.

Group 2:

Objectively measurable changes

Factors are taken as a basis for evaluation, which can prove with different measuring procedures, an improvement of the body energy field, a higher regulation ability or a healthier physiology.

These may include, for example, the following:

Interference-free bioresonance testing, increasing Bovis value, balanced charge on interference zones, positive pulsation force, increasing epiphysis value, positive kinesiological muscle testing, better HRV testing (heart rate variability), and much more.

My evaluation of the functioning of regulation modules primarily assesses Group 2 factors.

Here’s why:

By focusing on the criteria of group 2, it is ensured that other – the corresponding person burdening – circumstances are virtually excluded.

For example, not in every case a water vein is to blame for poor sleep or loss of energy. It is often an important factor, but there are countless other stresses that also lead to similar symptoms. E.g. a military transmission facility nearby, psychosomatic stress, hormonal problems (e.g. hypothyroidism), drug interactions, MCS (multiple chemical intolerance), Lyme disease, mercury exposure, pollutant exposure e.g. to PCD, Lindane, DDT, etc., intestinal parasites, autoimmune diseases, and much much more.

Experiences from practice show that in some (special) cases, subjectively the same sleep problems still occur after different regulation modules have been tried, and later even the sleeping place has been moved to a measurably disturbance-free place.

In one person, for example, no more stress could be detected therapeutically, but the nocturnal complaints remained unchanged. In such a case, the solution must be sought elsewhere. Or rather, such a pattern of complaints usually builds up over a longer period of time and it often takes various factors that, as a sum, bring the bucket to overflow, so to speak, and then oversensitize the body.

In such cases, unfortunately, there is no universal solution, but one must desensitize the body in layers, so to speak. The use of a Biofieldformer of any kind, as long as it works measurably, should be one of the first steps. Because without energy – which is demonstrably withdrawn from the body by geopathic stress – no self-regulation is possible.

My Tip:

In case of severe complaints, first have a bioresonance test done to narrow down or point out the main sources of stress.

Then go into the cause level and e.g. make shieldings against E-smog, install a biofield shaping or make a nutrient cure.

After 4-5 weeks, another bioresonance test. Then it can be determined very well whether a biofield shaping, an interference suppression or a shielding has an effect. If the stresses are then no longer indicated, but sleep problems still occur, continue to search. For example, in the area of the endocrine system, food, pollutants, mold toxins, etc. By this way of proceeding, one does not go in circles, but step by step eliminates possible factors.

Often it simply takes a certain amount of time until the body – after it has gotten rid of a stress – finds its way back into self-regulation and finally also a better sleep sets in.

Offered impulses for a regulation can often not be implemented at all, if not enough energy is available. Therefore, it is all the more important to first ensure that the body is no longer deprived of energy at night by means of an interference suppression or a biofield formation.

Why geopathic interference zones are often vertically displaced

Sebastian Krueger — Sat, 09 Sep 2017 11:34:51 +0000

At this point I would like to address the question, which arises again and again in practice, why water veins in different floors are not necessarily to be measured at the same place, and how it comes to that.

Vertically shifted … What does that mean exactly?

In some of my trainings I have learned that you basically only need to examine one floor of a house for earth rays and then transfer these results 1 to 1 to the floors above. But is that really the case? Unfortunately no. Because in my daily practice it has been shown again and again that disturbance zones, which were to be found e.g. in the first floor at a certain place, were or are to be measured in the floor above sometimes somewhat shifted – sometimes even quite strongly shifted, or more undifferentiated. But how can this be? Water veins should always remain in the same place, shouldn’t they?

When this happened to me the first few times, it was always very energy-consuming. Because, on the one hand, I naturally wanted to point out every interference zone as precisely as possible, but on the other hand, I had this external belief set in my head that an interference zone that had already been found on the lower floor had to be in the same place upstairs.

In addition, I was convinced that my customers also saw it that way. I therefore always regularly broke out in a sweat when the interference zones found in the individual storey levels did not coincide.

In addition, I must mention that during the first time I was only on the road with a dowsing rod, and it has therefore been all the more difficult to then explain the results found. Today I measure with the help of a bioresonance device, so that I can define the different frequency spectra of the individual interference zones very precisely.

Likewise, I can explain to my clients today, using examples from nature, how it can happen that I can measure the spectrum – or frequency – of one and the same water vein on different floors at different positions.

A question of frequency level

In order to understand how the spectrum of a water vein behaves, we must again make a small physical detour into the realm of frequencies.

As already described in more detail in other articles, the frequency spectrum of a water vein that we can feel consists of at least two components. On the one hand, there is an individual frequency spectrum, which, for example, distinguishes a water vein from a fault or another phenomenon.

These frequency spectra can be precisely distinguished, for example, with a bioresonance device (a spectrum is several individual frequencies which, taken together, produce a spectrum. Like e.g. the spectrum of visible light).

And secondly, there must be what I call a “carrier wave” that has the following properties:

It vibrates extremely high – the frequency is about 10h45 Hertz.
It is very short-waved – and thus passes virtually through everything unhindered.
It behaves similarly to a laser beam – and therefore does not scatter

So any kind of earth radiation is a kind of frequency modulation, as we know it e.g. from a radio station.

The great fear in the search for a well

If one has to look for an optimal drilling point for a well with the dowsing rod, a basic problem arises again and again. Namely, it can happen that you get the rash for a water vein at a certain point – but the real course of the vein is a little further to the left or right.

This can happen when you mentally tune into the frequency of the water or the water vein, rather than the geological “bank” of the vein.

If, for example, a cavern has formed above the vein, or a quartz vein is running, it is possible that the total spectrum of the water vein – including the carrier wave – is diverted by geological, technical or other circumstances, and no longer radiates straight upwards.

So it can happen – and it does quite often – that the irritation zone of a water vein is not directly above the actual vein.

Do fields always have to build up in a cone shape?

According to physical science, fields always build up in a cone shape. This would mean in this case that above the cavern or discharging disturbance, the spectrum of the water vein should radiate broadly to all sides.

But it does not!

However, if you compare the total spectrum of a water vein with a laser beam, which, unlike a light bulb, also does not scatter but runs in a very straight line, this explains itself – and thus also the topic of this article.

For example, if we take a small pocket laser and place it vertically on the floor, it will beam upward at a 90° angle. However, if we place it on a slightly slanted surface, its beam will also be slightly slanted. According to the angle of the base.

And in my opinion it is exactly the same with a water vein. Because if the highly radiating spectrum of a vein is slightly diverted by some circumstance, it is very likely that this then no longer radiates straight up, but slightly offset – or oblique. The result is then an interference zone, which shifts vertically continuously.

In nature, this can be observed very well in trees that first grow straight – and then from a certain height – start to avoid the disturbance zone. This can be clearly seen in the upper picture on the page.

In the second picture you can see the whole thing from another perspective. You can see the first tree there, how it starts to avoid the disturbance zone from about 2m height. In the background (in the red circle) you can see another tree, which is twisted from the same height. It, too, reacts to the diagonally running spectrum of the water vein at this point.

Another sign that the trees are affected by a water vein is the strong moss in the area of the disturbance.

By the way, a similar phenomenon can be found with global grids. Although these are not earth rays – i.e. coming from the earth – but magnetic grid systems, the lines as well as the crossing points, respectively the corresponding frequency spectra are also often derived.

Thus, it is not uncommon that an intersection point of the Curry grid has to be measured somewhat offset in different floors of a house. It is therefore not possible to examine one floor of a house and transfer the results to the remaining floors, but must measure individually on each floor.

The Sick Bed

Sebastian Krueger — Sat, 01 Jul 2017 14:11:43 +0000

As already described in one of my other articles, the word verordnen originally comes from verorten – at least that is how it is handed down from ancient sources, and it makes perfect sense.

Because in former times many physicians, who in contrast to most “studied” physicians today, were still real healers, and/or the oath of the Hippokrates (for the best well-being of the patient) given by them also really seriously took, that many illness symptoms of alone formed back, if the sleep place was moved to another place.

The body is capable of enormous regulation, and many of the symptoms that we experience as illness, such as weakness, fever, cold, fatigue, etc. are basically regulatory reactions of the body, and actually intended for self-preservation. But more about this in another place …

In this article, I would like to talk again about the importance of a “good” sleeping place, i.e. a place that is conducive to human health, and I would like to give a small case history from one of my studies as an example:

A few weeks ago I was asked by a young woman to do a building biology study of a house she might want to buy. She was primarily interested in the pollution caused by a mobile phone transmission tower stationed nearby, a low-frequency pollution caused by the house’s electrical installation, as well as a geopathic examination of the sleeping places with regard to earth radiation.

To the house belongs a huge property with over 15,000 square meters of top-maintained garden, which is completely maintained by the previous occupant – an 84 year old lady – alone (!) daily.

During the examination of the lady’s sleeping place it then turned out that it was strongly disturbed by a curry lattice intersection and a fault, which again did not fit at all to the energetic constitution of the old lady. She was fit as a fiddle – but due to the nocturnal stress she should have been rather sickly and weak. According to experience, this did not fit together … so I began to look for the cause, and should also find it soon …

After a short conversation with the old lady, I examined the sleeping place, the living room as well as parts of the property, and found, besides the usual left-turning interference zones, several very highly vibrating and above-average wide right-turning water veins running through the entire property. For example, the lady’s sofa seat was located on an intersection of two clockwise veins with a total Bovis value of 22,000 Bovis. Likewise, there were large areas of the garden, where she spends many hours a day, with building up vibration values of over 16,000 Bovis.

Then in our conversation she told me that she is only in bed “briefly” to sleep, and during the day is either on the couch, or working in the garden.

That was the solution, because now it made sense!

Because she spends a large part of the day in high dextrorotatory and thus constructive oscillation fields, her energy store is always full to the brim, and she can cope with losing some energy in bed at night. She gets it back during the day. By the way, it is often similar with children – provided they play outside a lot and less in front of the computer .

” What means clockwise and counterclockwise in water veins?
” What is the Bovis Value?

The situation of the lady becomes problematic – and transferred that of many people, if they are cut off from their daily energy supply.

For example, she would only need to twist a foot while gardening or become bedridden for some other reason, and she will go downhill. Such cases, unfortunately, I encounter very often … First with their energy system, then with their overall health. Because where there is no energy, the body can no longer regulate, and as in a chain, usually at some point the weakest link breaks.

Now imagine how many people are probably lying in hospitals on geopathic interference zones that drain them of important life energy every night.

In addition, people lie there in metal beds, with many technical devices in the immediate vicinity, whose fields couple to the beds and thus to the patients, further weakening the energy field.

To top it all off, imagine what happens to people who have been drained for years on interference zones, then are hospitalized with a cancer diagnosis, have their entire organism poisoned there with chemotherapy and have their entire energy system destroyed, and then are “put down” again, confined to bed, on a geopathic interference zone that immediately nips any attempt at regeneration in the bud. Good health!

I advised the old lady that if she was bedridden, she should definitely not move to her bed, but to her couch, because there she is guaranteed to recover quickly.