At this point I would like to go into more detail about the Benker cube grid, since I often encounter this grid in my daily work, usually in connection with severe health problems of the people concerned.
What exactly is the Benker-Kuben grid?
The Benker cubes grid is a radial, i.e. three-dimensionally arranged grid system, which is built up from cubes alternating in polarity. It is one, respectively the main component of the global grid and it does not count to the earth rays, because it does not come from the earth!
Where exactly the grid comes from and what it really is, we do not know. But we do know that it is a magnetic grid system, which has specific energetic qualities. And that it is really considered by very few building biologists, dowsers or radiesthesists.
The increment of the individual cubes (cubes) is 10m by 12m, aligned north/south east/west. At least that is the theory. In practice, however, it often turns out to be somewhat offset and sometimes only appears in fragments, or shifts.
Eric Walker, a fellow building biologist from Hong Kong, recently gave an interesting talk on the Benker grid in a major city, documenting with many pictures that the Benker grid can be derived and fragmented from reinforced concrete, construction cranes, etc.
In many apartments there are only fragments of the grid lines to measure. In some cases it also shifts. I myself have to do in my analyses also frequently with the Benker grid and can confirm that the grid can be derived by metals – e.g. a balcony grid made of metal – and often “jumps”. And also that it “wanders” with the moon phases in rare cases.
The grid was (re)discovered by Anton Benker. Hence the name. About the origin there are different theories, but basically we don’t know exactly. Some speak of an information guidance system from ancient times – comparable with the ley lines, others try to explain it via the earth’s rotation.
The energetic and health effects are felt by many people in any case – even if the symptoms are often attributed to ignorance or ignorance, other possible causes or simply coincidence.
For example, if one sleeps on a Benker line, the body is depolarized quasi-constantly because the neighboring cubes have different polarity.
According to Anton Benker, it also makes a difference whether one sleeps in a minus or plus cube, and depending on the polarity, other geopathic interference zones also behave differently. On an undisturbed place in a minus cube one sleeps more restful and deeper, but geopathic disturbance zones have a stronger effect. In a plus cube, one can “bear” other disturbances more easily, but does not have such a deep sleep overall. There is also the idea that e.g. wild animals on their game paths balance themselves out in the polarities by the permanent run through the differently polarized cubes.
With the help of the Rayocomp PS10, we can exactly display the frequency of the Benker grid, and thus create a resonance to the lines – and thus precisely locate them. So you don’t have to “guess” with a dowsing rod whether such a line could be there, but you can measure it reproducibly today.
Bioanalytically, a Benker line can be determined by factors that are always constant, such as the Bovis value and the magnetic pulsation force. A Benker line has a stable Bovis value of 6,000 Bovis and a magnetic pulsation force of less than 5%. As a result, it appears very tiring and “stressful”. Sleep is usually very restless and one does not find rest.
People who sleep on a Benker line for long periods of time are often very drained of energy and constantly exhausted. Often these people report weakness, muscle pain, joint pain, and/or neurological as well as cardiac problems.
The geopathic supergauss is the Benker cube cross – i.e. a crossing point of two Benker lines. This has only about 1000 Bovis and has an extremely energy-sapping effect. In addition, the magnetic pulsation force, i.e. the bioavailability, is almost zero, and the body is constantly stressed. In other words, the vegetative nervous system is permanently kept in sympathetic mode.
In my most severe health cases I usually find a Benker cube cross in the sleeping area – often additionally in combination with further geopathic disturbances like faults, water veins or curry grid crossings.
Dr. Hartmann, who in his discoveries and descriptions of the Hartmann lattice named after him always spoke of the dangerous double lines, basically meant the Benker lines.
Since the Benker grid is a magnetic grid, it is also likely that electrosmog – and especially high frequency – can also couple to the grid. This would explain, for example, that some people experience a sharp increase in Benker complaints when, for example, a WLAN is switched on.
I must confess that for a long time I myself did not give enough importance to the Benker grid, because I did not learn about this grid in my dowsing training, nor in the common literature. Today, many symptoms are often explained to me by taking it into account.
In my investigations, I now recommend avoiding the Benker grid if at all possible.
From a therapeutic point of view, the Benker frequencies can be balanced very well by biofield shaping with the BIOGETA® FM Biofieldformers. This also immediately improves sleep for many people.
However, I believe that we are not yet able to assess the Benker Grid correctly – e.g. if there are connections to technical fields, so I usually try to avoid the Benker Grid in my harmonizations and if necessary I prefer to compensate for a water vein or a fault line – of course only if the local possibilities allow it.
But with the evasion it is unfortunately such a thing, because already too often I have experienced suddenly newly appeared faults, water veins, jumped Curry grid intersections and even already wandering Benker lines. For this reason I always recommend to install an additional biofield formation. But more about this in another place …
Symptoms due to Benker cubes grid
As mentioned above, I very often encounter Benker cubes grids in the sleeping areas during my analyses and harmonizations. I suppose this is due to the fact that the discomfort caused by a prolonged stay on a Benker line – or even worse on a Benker intersection – usually causes a higher level of suffering in the affected people than, for example, a water vein – which may not even be noticed by many people, because there is a natural compensation for these frequencies in nature in many places.
In other words, people with a Benker-Kuben strain tend to look for solutions to their sleep problems more often than people with other strains. But as I said, this is just my guess.
MS (multiple sclerosis) through Benker cubes lattice?
Whether there is a direct connection between MS and the permanent stay on a Benker cube grid, I cannot say with certainty. However, in the last two years, I have not seen a single case of MS in a client (and unfortunately there have been a few) who had multiple sclerosis – but there was no disturbance of the sleeping area by a Benker cube intersection. Not one!
I therefore suspect a connection. It is not that the Benker grid triggers MS, but that the permanent depolarization permanently stimulates the nervous system – and thus the nerve receptors, so that any existing inflammatory processes heal during the day (vagotonus), and the healing is interrupted again at night (sympathetic nervous system).
This leads to a growing scarring (sclerosis) of the myelin in the nerve endings and thus ultimately to communication interruptions. As I said, this is only my theory – but it makes sense to me.
Possibly there are also Borrelia and/or a poisoning by mercury, which attacks the nerve cells before, a mental motor conflict according to GNM (Hamer) … and with a bit of bad luck it is then called MS in orthodox medicine.
In my three most severe cases, each involving young people unable to walk or move in a coordinated manner, all three conditions were met:
- There was a stark self-esteem conflict before the onset of the first MS episode
- All slept for a long time on a Benker cubes crossing point
- All of them were found to have mercury exposure with the help of bioresonance testing.
On the other hand, I experience many cases of exposure to Benker cube lines or intersections that do not result in MS, but do result in other sometimes severe symptoms.
Here are a few examples:
Middle-aged woman with severe depression, multiple spinal surgeries without improvement of back pain, insomnia, complete lack of energy, unable to work for several years, physicians are at a loss.
Sleeps for 8 years on Benker cubes crossing point plus warp longitudinally through the bed, plus Curry grid crossing point at hip area.
Middle-aged man with severe depression and suicidal ideation, insomnia, complete lack of energy and exhaustion, doctors are helpless
Sleeps on Benker cubes intersection for several years.
Young man with severe burnout. Had to be picked up from work by emergency ambulance because he felt like he was burning from the inside. Unable to work for 8 months, doctors at a loss
Slept on Benker cubes intersection for several years.
Man in his early 40s with most severe cardiac arrhythmias, nocturnal breathing pauses, sweating, multiple emergency room admissions with cardiac catheter examinations, fatigue, unable to get to sleep, waking up at night and unable to fall asleep, restlessness.
Benkerline longitudinally through the entire body, plus warp transversely through sleeping area.
Woman in her mid-40s completely exhausted, MS diagnosis, severe spasticity, depression, sits in wheelchair, cannot keep up vitamins although much is supplemented, complains of Benker-typical sleep in the form of severe restlessness, waking up and not being able to fall back asleep, morning exhaustion and complete lack of energy.
Sleeps on Benker cubes intersection plus warp across bed for 8 years.
child extremely behavioral and aggressive, mother psychotic and in the apartments below constantly cancer cases, heart attacks and other diseases
In both bedrooms under the beds Benker crossing points with warping through the head area.
(see case history “A house that makes you sick“)
I could add many more cases to this list. Again and again in my home analyses I meet people, some with severe health problems, where the sleeping space is disturbed by the Benker-Kuben grid. The additional difficulty with many cases is that for some reason the Benker grid causes a kind of withdrawal symptom when the places are equalized or the beds are moved.
As a rule, someone who has slept for a long time on a Benker cube line or a crossing point often feels an inner restlessness for several weeks afterwards, even on a trouble-free place, until the body has regulated out the stress. With children, this usually happens much faster.