In the field of harmonization or the removal of earth radiation, there is now a countless range of devices, methods and utensils.
Some of it works … some of it partly, but a lot of it doesn’t. So it’s no wonder that the “normal” person is usually rather skeptical about the whole thing.
In the blog post “Can you remove earth radiation?“I have briefly described the common basic methods, so I will not go into detail about each method here.
If one leaves the esoteric thought once away and takes up the whole topic “neutralizing water veins or earth rays” once scientifically, one does not come past it to regard the whole primarily in the form of different frequency spectra.
What is a frequency?
The term frequency basically only describes the number of passes of a wave – ideally as a sine wave – per second. The unit of measurement for this is hertz. A frequency of 100 hertz therefore has 100 passes per second.
Everything is vibration
Scientists and esotericists agree on one thing, and that is that everything in this “physical” reality is basically vibration. If one “zooms” with an electron microscope into a human body, one finds quite simply expressed an atomic nucleus around which electrons whiz. And this with a distance which is about as big as if one would throw a one-cent piece into the Cologne Cathedral.
If one would suck off the “empty” areas in all atoms of the human body, so that electron and atomic nucleus touch each other quasi as matter, we would be about 0.2 mm big on the average. Say we consist of nothing to the very largest part!
Max Planck has described it so “matter is condensed oscillation”. Whereby this is also not the truth, because if one looks still deeper, we come to the quants or strings which change their state from oscillation into particle and back into oscillation. And this in dependence on the observer (The double-slit experiment).
If we have understood this once rudimentarily, it is absolutely logical to recognize that every form of matter is basically pure vibration and has a corresponding – quite own – vibration frequency. Exactly in the same way every organ has a certain frequency and also every geological disturbance zone, to draw the bow again to the main topic of this article.
In bioresonance, we work with exactly these known frequency values insofar as an innumerable amount of known frequencies or basic frequency values are compared with the individual organs or – to stay with this example – with a sleeping place to be checked.
For this purpose, a modern bioresonance device generates through a sophisticated dipole antenna technology, all frequency values in the device, to which a detector mat on a sleeping place – or corresponding body electrodes is connected. If there is a match on both sides – i.e. a resonance – we know for sure if the sleeping place is polluted by a water vein, for example, or if a certain organ(system) has a disbalance. The whole thing is now expressed very simply.
At this point it is important to understand that with the help of a bioresonance device, all geopathic disturbances such as water veins, faults and global grids (Hartmann grid, Curry grid or Benker grid), WITHOUT a dowsing rod, are 100% safe to locate and define.
And that alone by the known physical frequency values. This means that different results from different dowsers are effectively a thing of the past – provided that a quasi-biological standard is established, which would take the whole subject out of the realm of “hocus-pocus” and into a more scientific context. Personally, I would very much welcome this development.
The experimental setup
In the context of my training in bioresonance according to Paul Schmidt, the topic of geopathy has of course particularly occupied me. As a building biology measurement technician of the Paul Schmidt Academy, a portable bioresonance device (PS 10 from Rayonex) is part of the basic equipment, which has the already described advantage of quasi 100% diagnostic accuracy.
When I examine a sleeping place for interference zones with such a device, a highly conductive detector mat picks up the smallest vibrations and potential differences of the corresponding area and passes them on to an electrode.
On the other hand, various frequency programs can be set on the device with frequency spectra consisting of many individual frequencies, all of which have a correspondence with the pattern of a certain interference zone, e.g. a water vein.
With a tensor connected to the device, it is now possible to determine whether there is resonance – i.e. whether the disturbance is present – without mentally entering the field. Even whether it is the same charge.
If there is resonance, a quasi-natural magnetism is created and the tensor starts to vibrate. If there is no resonance, nothing happens and the place is free of interference.
In the field of bioresonance there are two methods of passive tensor inquiries. Passive means that you do not focus on a phenomenon as in radiesthesia, ask and then get an answer, but outside the field, just establish resonance. This costs no energy, you are not in the field and you cannot influence it yourself, even if you want to.
The second passive method is to put yourself into the oscillating circuit and check whether you yourself are free of disturbance or are standing on a disturbance zone. In the disturbance-free state, the tensor vibrates in rotation – the body energy flows in a sine curve – if the body is disturbed, a linear movement takes place – the sine in the body is disturbed. Interestingly, this works the same for all people. Completely automatically. You don’t have to concentrate on anything or believe in anything. Purely bioenergetic.
The aim of many methods of water vein decontamination or harmonization of earth rays is to harmonize the organism in such a way – i.e. to provide it with a spectrum of balancing frequencies – so that it no longer perceives the interference zone as such. In most cases, the goal is not to eliminate the interference zone. It is even the case that some building biologists insist that this is impossible, because an interference zone simply cannot be deleted, but only the body can be harmonized.
However, I am of the opinion that one can delete and thus physically eliminate any frequency by an appropriate interference, if one knows the frequency.
To conclude briefly, if I use bioresonance to precisely locate an interference zone, e.g. a water vein and a curry grid intersection under a sleeping place, and then push a BIOGETA® bio-wafer into the field (often a distance of 1m to the interference zone is sufficient), the interference zone physically disappears and can no longer be recognized as such by the bioresonance device.
None of the many frequency values of water veins, faults or global grids are then present. The device then physically recognizes this place as free of interference. Of course, the rotation test in the field then also shows free rotation without geopathic interference. The same happens when I connect a BIOGETA® FM Biofieldformer to the circuit.
After installation, no geopathic interference zone is measurable in the entire house. Personally, I know of no other method of interference suppression that can do this!
Recently, construction biologist (PSA) Andreas Grohmann wrote the following to his colleagues in a public construction biology forum:
“Once again, I would like to refer to Biogeta’s Bio-Wafers and Home Modules (FM Biofeldformer Home). As soon as I use one of them, I find with my PS10 (Note: Bioresonance device for reproducible definition of earth radiation in building biology) no more interference zones” …